lkml.org 
[lkml]   [2019]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.4 198/350] pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESET
Date
From: Rajendra Nayak <rnayak@codeaurora.org>

[ Upstream commit 81898a44f288607cb3b11a42aed6efb646891c19 ]

The SDC_QDSD_PINGROUP/UFS_RESET macros are missing the .tile info needed to
calculate the right register offsets. Adding them here and also
adjusting the offsets accordingly.

Fixes: f2ae04c45b1a ("pinctrl: qcom: Add SC7180 pinctrl driver")

Reported-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/20191021141507.24066-1-rnayak@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/qcom/pinctrl-sc7180.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sc7180.c b/drivers/pinctrl/qcom/pinctrl-sc7180.c
index 6399c8a2bc22c..d6cfad7417b1c 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc7180.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc7180.c
@@ -77,6 +77,7 @@ enum {
.intr_cfg_reg = 0, \
.intr_status_reg = 0, \
.intr_target_reg = 0, \
+ .tile = SOUTH, \
.mux_bit = -1, \
.pull_bit = pull, \
.drv_bit = drv, \
@@ -102,6 +103,7 @@ enum {
.intr_cfg_reg = 0, \
.intr_status_reg = 0, \
.intr_target_reg = 0, \
+ .tile = SOUTH, \
.mux_bit = -1, \
.pull_bit = 3, \
.drv_bit = 0, \
@@ -1087,14 +1089,14 @@ static const struct msm_pingroup sc7180_groups[] = {
[116] = PINGROUP(116, WEST, qup04, qup04, _, _, _, _, _, _, _),
[117] = PINGROUP(117, WEST, dp_hot, _, _, _, _, _, _, _, _),
[118] = PINGROUP(118, WEST, _, _, _, _, _, _, _, _, _),
- [119] = UFS_RESET(ufs_reset, 0x97f000),
- [120] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x97a000, 15, 0),
- [121] = SDC_QDSD_PINGROUP(sdc1_clk, 0x97a000, 13, 6),
- [122] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x97a000, 11, 3),
- [123] = SDC_QDSD_PINGROUP(sdc1_data, 0x97a000, 9, 0),
- [124] = SDC_QDSD_PINGROUP(sdc2_clk, 0x97b000, 14, 6),
- [125] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x97b000, 11, 3),
- [126] = SDC_QDSD_PINGROUP(sdc2_data, 0x97b000, 9, 0),
+ [119] = UFS_RESET(ufs_reset, 0x7f000),
+ [120] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x7a000, 15, 0),
+ [121] = SDC_QDSD_PINGROUP(sdc1_clk, 0x7a000, 13, 6),
+ [122] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x7a000, 11, 3),
+ [123] = SDC_QDSD_PINGROUP(sdc1_data, 0x7a000, 9, 0),
+ [124] = SDC_QDSD_PINGROUP(sdc2_clk, 0x7b000, 14, 6),
+ [125] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x7b000, 11, 3),
+ [126] = SDC_QDSD_PINGROUP(sdc2_data, 0x7b000, 9, 0),
};

static const struct msm_pinctrl_soc_data sc7180_pinctrl = {
--
2.20.1
\
 
 \ /
  Last update: 2019-12-10 22:25    [W:2.764 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site