lkml.org 
[lkml]   [2004]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: HARDWARE: Open-Source-Friendly Graphics Cards -- Viable?


David Lang wrote:
> On Wed, 20 Oct 2004, Timothy Miller wrote:
>
>> Sure, SOME companies release specs so that we can develop open source
>> drivers, but those cards tend to be prohibitively expensive, slower
>> than their cheaper counterparts from ATI or nVidia...
>
>
> Tim, I think this is the key problem. with the current ATI/nVidia cards
> beign in the $50 range (with other cards on the market for as low as
> $30) are you really going to be able to come up with a card that's price
> competitive? (completely ignoring the performance question)

I've just had a discussion with our senior ASIC designer, and we came up
with ball-park numbers for the cost of a first run of boards in a
quantity of 1000.

FPGA Anywhere from $50 to $500, depending on logic area
Power regulators $10 - $40
RAM $24 (for 128 megs)
DAC $2
DVI xmit $8
PCB $7
Connectors, etc. $4
PROM chips $5

Given the sum of that, whatever it turns out to be, for it to be worth
while in quantities that small, we'd have to make roughly that much
again in profit (assuming development cost and development time are
something like proportional).

If the quantities were a lot higher, then prices go down for everything.
For instance, we can take the FPGA design and have the vendor turn it
directly into an ASIC. What you get is something that requires 20% the
chip area and runs twice as fast, and the per-chip cost is a lot lower,
but there's an NRE of $100K, and then you can't reprogram the chip.
(Maybe there should be 'fixed' and 'reprogrammable' versions of the
product.)

>
> as for your other question of if an open approach could be viable (after
> all nobody does it today so doesn't that proove it isn't)
>
> this is where there is a significant disagreement. the Linux folks think
> that such openess would be very viable and the companies are just
> pursuing a legacy approach, but the companies are scared to open things
> up becouse they don't believe that they would remain viable.

Right. There are two problems that arise here. One is that another
company might try to pirate our design (it's an FPGA bitfile on a PROM,
after-all), and although that is illegal, litigation is something to be
avoided. The second problem is that another, much larger, company would
look at all of our published materials, produce something compatible,
and then undercut us out of this particular market. While I can
certainly appreciate the capitalist value of that sort of competition, I
am in the situation where that competition would simply kill my project
instantly.

I like to pick on Stallman and his excessive idealism, but in this case,
I want his utopian ideal to work. I want to have a piece of hardware
which is totally compatible with the ideal. The problem is that, in
some markets, the ideal may be completely unrealistic.

> since nobody has done this yet (for video cards anyeay) there is no
> proof one way or the other.

Well, if Tech Source management decides that this project isn't worth
the effort, you'll have a small piece of circumstantial evidence that
leans toward "it's not viable". I personally want to find a way to make
it work.

To the open source community, this is a golden opportunity to directly
influence the design of a piece of hardware which fits their ideals.
For me personally, this is a golden opportunity to work on a project
from which I'll derive an immense amount of enjoyment. For both
accounts, I'm desperate to find a way to make it work. :)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:07    [W:0.342 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site