lkml.org 
[lkml]   [2015]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 21/21] clk: tegra: pll: Fix issues with rates for VCO PLLs
Date
From: Andrew Bresticker <abrestic@chromium.org>

Without this change clk_get_rate would return the final output
rather than the VCO output as it would factor in the pdiv when
it shouldn't. This will cause problems for all dividers in the
subtree of the VCO PLL.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
---
v5:
- Switched to using flag for VCO_OUT

v3:
- Added fix for this bug which was found during testing

drivers/clk/tegra/clk-pll.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 43d7ee4fb603..11d97fd559d6 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -737,6 +737,8 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
spin_lock_irqsave(pll->lock, flags);

_get_pll_mnp(pll, &old_cfg);
+ if (pll->params->flags & TEGRA_PLL_VCO_OUT)
+ cfg.p = old_cfg.p;

if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p ||
old_cfg.sdm_data != cfg.sdm_data)
@@ -796,11 +798,15 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,

_get_pll_mnp(pll, &cfg);

- pdiv = _hw_to_p_div(hw, cfg.p);
- if (pdiv < 0) {
- WARN(1, "Clock %s has invalid pdiv value : 0x%x\n",
- __clk_get_name(hw->clk), cfg.p);
+ if (pll->params->flags & TEGRA_PLL_VCO_OUT) {
pdiv = 1;
+ } else {
+ pdiv = _hw_to_p_div(hw, cfg.p);
+ if (pdiv < 0) {
+ WARN(1, "Clock %s has invalid pdiv value : 0x%x\n",
+ __clk_get_name(hw->clk), cfg.p);
+ pdiv = 1;
+ }
}

if (pll->params->set_gain)
@@ -1087,6 +1093,8 @@ static int clk_pllxc_set_rate(struct clk_hw *hw, unsigned long rate,
spin_lock_irqsave(pll->lock, flags);

_get_pll_mnp(pll, &old_cfg);
+ if (pll->params->flags & TEGRA_PLL_VCO_OUT)
+ cfg.p = old_cfg.p;

if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p)
ret = _program_pll(hw, &cfg, rate);
--
1.7.9.5


\
 
 \ /
  Last update: 2015-05-12 20:01    [W:0.280 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site