[lkml]   [2005]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: rc6 keeps hanging and blanking displays where rc4-mm1 works fine.
On Gwe, 2005-08-12 at 12:01 +0200, Helge Hafting wrote:
> solveable by resizing. But the machine will occationally hang, forcing
> me to
> use the reset button. I lost my mbox file to this (from an ext3 fs, on
> raid-1 on scsi.)

Unless you are using data=journal and have turned write cache off on
your IDE drives that is expected. Metadata journalling protects your
file system intgerity. Data journalling is more expensive but will
protect your file integrity if the disk layer is also correctly set up.
Unfortunately the IDE layer defaults the wrong way and despite many
complaints has not been changed. In later 2.6 with modern drives you can
also enable barrier mode on the IDE layer which gives better results
than turning off the write cache.


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-08-12 12:10    [W:0.174 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site