lkml.org 
[lkml]   [2021]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC v2 00/34] SLUB: reduce irq disabled scope and make it RT compatible
On Wed, Jun 09, 2021 at 01:38:29PM +0200, Vlastimil Babka wrote:
> Changes since RFC v1 [1]:
> * Addressed feedback from Christoph and Mel, added their acks.
> * Finished RT conversion, including adopting 2 patches from the RT tree.
> * The optional local_lock conversion has to sacrifice lockless fathpaths on RT
> * Added some more cleanup patches to the front.
>
> This series was initially inspired by Mel's pcplist local_lock rewrite, and
> also by interest to better understand SLUB's locking and the new locking
> primitives and their RT variants and implications. It should make SLUB more
> preemption-friendly and fully RT compatible, hopefully without noticeable
> regressions on !RT kernels, as the fast paths are not affected there.
>
> Series is based on 5.13-rc5 and also available as a git branch:
> https://git.kernel.org/pub/scm/linux/kernel/git/vbabka/linux.git/log/?h=slub-local-lock-v2r1
>

This failed to boot for me inside KVM.

[ 0.273576] SRBDS: Unknown: Dependent on hypervisor status
[ 0.273576] MDS: Mitigation: Clear CPU buffers
[ 0.273576] Freeing SMP alternatives memory: 36K
[ 0.273576] bad: scheduling from the idle thread!
[ 0.273576] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc5-unspecified+ #1
[ 0.273576] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 0.273576] Call Trace:
[ 0.273576] dump_stack+0x76/0x94
[ 0.273576] dequeue_task_idle+0x28/0x40
[ 0.273576] __do_set_cpus_allowed+0xe0/0x1a0
[ 0.273576] __schedule+0x7f7/0x8f0
[ 0.273576] __cond_resched+0x22/0x40
[ 0.273576] alloc_vmap_area+0x72/0x8b0
[ 0.273576] ? kmem_cache_alloc_node_trace+0x189/0x300
[ 0.273576] ? __get_vm_area_node+0x76/0x150
[ 0.273576] __get_vm_area_node+0xab/0x150
[ 0.273576] __vmalloc_node_range+0x6d/0x2c0
[ 0.273576] ? kernel_clone+0x9b/0x3e0
[ 0.273576] ? kmem_cache_alloc_node+0x18d/0x2f0
[ 0.273576] ? copy_process+0x218/0x1c40
[ 0.273576] copy_process+0x2c1/0x1c40
[ 0.273576] ? kernel_clone+0x9b/0x3e0
[ 0.273576] ? enqueue_task_fair+0xa1/0x590
[ 0.273576] kernel_clone+0x9b/0x3e0
[ 0.273576] ? acpi_hw_register_read+0x146/0x166
[ 0.273576] kernel_thread+0x55/0x70
[ 0.273576] ? kthread_is_per_cpu+0x30/0x30
[ 0.273576] rest_init+0x75/0xc0
[ 0.273576] start_kernel+0x7fb/0x822
[ 0.273576] secondary_startup_64_no_verify+0xc2/0xcb
[ 0.273576] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 0.273576] #PF: supervisor instruction fetch in kernel mode
[ 0.273576] #PF: error_code(0x0010) - not-present page
[ 0.273576] PGD 0 P4D 0
[ 0.273576] Oops: 0010 [#1] SMP PTI
[ 0.273576] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc5-unspecified+ #1
[ 0.273576] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 0.273576] RIP: 0010:0x0
[ 0.273576] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 0.273576] RSP: 0000:ffffffffbb803bb0 EFLAGS: 00010002
[ 0.273576] RAX: 0000000000000000 RBX: ffff9fa64ea2ecc0 RCX: ffffffffb9e00101
[ 0.273576] RDX: 000000000000000a RSI: ffffffffbb81a940 RDI: ffff9fa64ea2ecc0
[ 0.273576] RBP: ffffffffbb803c08 R08: 0000000000000000 R09: ffffffffbbaa699c
[ 0.273576] R10: 0000000000000000 R11: ffffffffbb803888 R12: ffffffffbb81a940
[ 0.273576] R13: ffff9f9a80245f40 R14: ffffffffbb1f0060 R15: 0000000000003fff
[ 0.273576] FS: 0000000000000000(0000) GS:ffff9fa64ea00000(0000) knlGS:0000000000000000
[ 0.273576] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.273576] CR2: ffffffffffffffd6 CR3: 0000000a60e10001 CR4: 0000000000170ef0
[ 0.273576] Call Trace:
[ 0.273576] __schedule+0x7f7/0x8f0
[ 0.273576] __cond_resched+0x22/0x40
[ 0.273576] alloc_vmap_area+0x72/0x8b0
[ 0.273576] ? kmem_cache_alloc_node_trace+0x189/0x300
[ 0.273576] ? __get_vm_area_node+0x76/0x150
[ 0.273576] __get_vm_area_node+0xab/0x150
[ 0.273576] __vmalloc_node_range+0x6d/0x2c0
[ 0.273576] ? kernel_clone+0x9b/0x3e0
[ 0.273576] ? kmem_cache_alloc_node+0x18d/0x2f0
[ 0.273576] ? copy_process+0x218/0x1c40
[ 0.273576] copy_process+0x2c1/0x1c40
[ 0.273576] ? kernel_clone+0x9b/0x3e0
[ 0.273576] ? enqueue_task_fair+0xa1/0x590
[ 0.273576] kernel_clone+0x9b/0x3e0
[ 0.273576] ? acpi_hw_register_read+0x146/0x166
[ 0.273576] kernel_thread+0x55/0x70
[ 0.273576] ? kthread_is_per_cpu+0x30/0x30
[ 0.273576] rest_init+0x75/0xc0
[ 0.273576] start_kernel+0x7fb/0x822
[ 0.273576] secondary_startup_64_no_verify+0xc2/0xcb
[ 0.273576] Modules linked in:
[ 0.273576] CR2: 0000000000000000
[ 0.273576] ---[ end trace 7199d6fbb50b4cf7 ]---
[ 0.273576] RIP: 0010:0x0
[ 0.273576] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 0.273576] RSP: 0000:ffffffffbb803bb0 EFLAGS: 00010002
[ 0.273576] RAX: 0000000000000000 RBX: ffff9fa64ea2ecc0 RCX: ffffffffb9e00101
[ 0.273576] RDX: 000000000000000a RSI: ffffffffbb81a940 RDI: ffff9fa64ea2ecc0
[ 0.273576] RBP: ffffffffbb803c08 R08: 0000000000000000 R09: ffffffffbbaa699c
[ 0.273576] R10: 0000000000000000 R11: ffffffffbb803888 R12: ffffffffbb81a940
[ 0.273576] R13: ffff9f9a80245f40 R14: ffffffffbb1f0060 R15: 0000000000003fff
[ 0.273576] FS: 0000000000000000(0000) GS:ffff9fa64ea00000(0000) knlGS:0000000000000000
[ 0.273576] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.273576] CR2: ffffffffffffffd6 CR3: 0000000a60e10001 CR4: 0000000000170ef0
[ 0.273576] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.273576] Rebooting in 90 seconds..

\
 
 \ /
  Last update: 2021-06-14 11:50    [W:0.382 / U:2.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site