lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 15/15 v4] regulator: s2mps11: Hand over GPIO to regulator core
Date
The GPIO descriptors used by the S2MPS11 driver are retrieved
during probe() and it is really helpful to have those under
devres management because of all the errorpaths in the
intialization.

Using the new dev_gpiod_unhinge() call we can remove the
devres management of the descriptor right before handing
it over to the regulators core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v3->v4:
- Resending.
ChangeLog v2->v3:
- Resending.
ChangeLog v1->v2:
- New patch handling this drivers GPIO descriptors properly.
---
drivers/regulator/s2mps11.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 63e66f485cc0..ee4a23ab0663 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -1178,7 +1178,12 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
config.of_node = rdata[i].of_node;
}
config.ena_gpiod = s2mps11->ext_control_gpiod[i];
-
+ /*
+ * Hand the GPIO descriptor management over to the regulator
+ * core, remove it from devres management.
+ */
+ if (config.ena_gpiod)
+ devm_gpiod_unhinge(&pdev->dev, config.ena_gpiod);
regulator = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(regulator)) {
--
2.19.2
\
 
 \ /
  Last update: 2018-12-06 13:45    [W:0.091 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site