lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/15 v4] regulator: max8952: Let core handle GPIO descriptor
Date
Use the gpiod_get() rather than the devm_* version so that the
regulator core can handle the lifecycle of these descriptors.

Fixes: d7a261c2d1f2 ("regulator: max8952: Pass descriptor instead of GPIO number")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v3->v4:
- Resending.
ChangeLog v2->v3:
- Resending.
ChangeLog v1->v2:
- Drop the gpiod_put() on the errorpath after devm_regulator_register()
as this will be handled by the regulator core.
- Put a comment in the code so maintainers knows not to
use managed resources (devm*)
---
drivers/regulator/max8952.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index 6c39fff73b8a..cf2a2912cb1b 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -231,9 +231,13 @@ static int max8952_pmic_probe(struct i2c_client *client,
else
gflags = GPIOD_OUT_LOW;
gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
- gpiod = devm_gpiod_get_optional(&client->dev,
- "max8952,en",
- gflags);
+ /*
+ * Do not use devm* here: the regulator core takes over the
+ * lifecycle management of the GPIO descriptor.
+ */
+ gpiod = gpiod_get_optional(&client->dev,
+ "max8952,en",
+ gflags);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
if (gpiod)
--
2.19.2
\
 
 \ /
  Last update: 2018-12-06 13:45    [W:0.084 / U:6.864 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site