lkml.org 
[lkml]   [2018]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/15 v4] regulator: lp8788-ldo: Let core handle GPIO descriptor
Date
Use the gpiod_get() rather than the devm_* version so that the
regulator core can handle the lifecycle of these descriptors.

Fixes: 2468f0d51548 ("regulator: lp8788-ldo: Pass descriptor instead of GPIO number")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v3->v4:
- Resending.
ChangeLog v2->v3:
- Resending.
ChangeLog v1->v2:
- Drop the gpiod_put() on the errorpath after devm_regulator_register()
as this will be handled by the regulator core.
- Put a comment in the code so maintainers knows not to
use managed resources (devm*)
---
drivers/regulator/lp8788-ldo.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
index 553b4790050f..2ee22e7ea675 100644
--- a/drivers/regulator/lp8788-ldo.c
+++ b/drivers/regulator/lp8788-ldo.c
@@ -501,8 +501,12 @@ static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
return 0;
}

- /* FIXME: check default mode for GPIO here: high or low? */
- ldo->ena_gpiod = devm_gpiod_get_index_optional(&pdev->dev,
+ /*
+ * Do not use devm* here: the regulator core takes over the
+ * lifecycle management of the GPIO descriptor.
+ * FIXME: check default mode for GPIO here: high or low?
+ */
+ ldo->ena_gpiod = gpiod_get_index_optional(&pdev->dev,
"enable",
enable_id,
GPIOD_OUT_HIGH |
--
2.19.2
\
 
 \ /
  Last update: 2018-12-06 13:44    [W:0.075 / U:0.308 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site