lkml.org 
[lkml]   [2015]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/9] rtc-pcf2123: put the chip reset into a function
Date
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
drivers/rtc/rtc-pcf2123.c | 64 ++++++++++++++++++++++++++---------------------
1 file changed, 36 insertions(+), 28 deletions(-)

diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index 257ce7d..d3c1447 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -260,6 +260,40 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
return 0;
}

+static int pcf2123_reset(struct device *dev)
+{
+ int ret;
+ u8 rxbuf[2];
+
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
+ if (ret < 0)
+ return ret;
+
+ /* Stop the counter */
+ dev_dbg(dev, "stopping RTC\n");
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
+ if (ret < 0)
+ return ret;
+
+ /* See if the counter was actually stopped */
+ dev_dbg(dev, "checking for presence of RTC\n");
+ ret = pcf2123_read(dev, PCF2123_REG_CTRL1, rxbuf, sizeof(rxbuf));
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(dev, "received data from RTC (0x%02X 0x%02X)\n",
+ rxbuf[0], rxbuf[1]);
+ if (!(rxbuf[0] & CTRL1_STOP))
+ return -ENODEV;
+
+ /* Start the counter */
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
static const struct rtc_class_ops pcf2123_rtc_ops = {
.read_time = pcf2123_rtc_read_time,
.set_time = pcf2123_rtc_set_time,
@@ -269,7 +303,6 @@ static int pcf2123_probe(struct spi_device *spi)
{
struct rtc_device *rtc;
struct pcf2123_plat_data *pdata;
- u8 rxbuf[2];
int ret, i;

pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
@@ -278,29 +311,9 @@ static int pcf2123_probe(struct spi_device *spi)
return -ENOMEM;
spi->dev.platform_data = pdata;

- /* Send a software reset command */
- dev_dbg(&spi->dev, "resetting RTC\n");
- ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
- if (ret < 0)
- goto kfree_exit;
-
- /* Stop the counter */
- dev_dbg(&spi->dev, "stopping RTC\n");
- ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_STOP);
- if (ret < 0)
- goto kfree_exit;
-
- /* See if the counter was actually stopped */
- dev_dbg(&spi->dev, "checking for presence of RTC\n");
- ret = pcf2123_read(&spi->dev, PCF2123_REG_CTRL1, rxbuf, sizeof(rxbuf));
- dev_dbg(&spi->dev, "received data from RTC (0x%02X 0x%02X)\n",
- rxbuf[0], rxbuf[1]);
- if (ret < 0)
- goto kfree_exit;
-
- if (!(rxbuf[0] & CTRL1_STOP)) {
+ ret = pcf2123_reset(&spi->dev);
+ if (ret < 0) {
dev_err(&spi->dev, "chip not found\n");
- ret = -ENODEV;
goto kfree_exit;
}

@@ -308,11 +321,6 @@ static int pcf2123_probe(struct spi_device *spi)
dev_info(&spi->dev, "spiclk %u KHz.\n",
(spi->max_speed_hz + 500) / 1000);

- /* Start the counter */
- ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
- if (ret < 0)
- goto kfree_exit;
-
/* Finalize the initialization */
rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
&pcf2123_rtc_ops, THIS_MODULE);
--
2.5.0


\
 
 \ /
  Last update: 2015-11-04 17:01    [W:0.790 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site