lkml.org 
[lkml]   [2013]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 9/9] ARM: add initial support for Marvell Berlin SoCs
On 11/07/13 06:40, Jisheng Zhang wrote:
> On Tue, 5 Nov 2013 06:28:43 -0800
> Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> wrote:
>
>> This adds initial support for the Marvell Berlin SoC family with
>> Armada 1500 (88DE3100) and Armada 1500-mini (88DE3005) SoCs.
>>
>> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>> Reviewed-by: Jason Cooper <jason@lakedaemon.net>
>> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
>> ---
[...]
>> diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
>> new file mode 100644
>> index 0000000..c5b39b1
>> --- /dev/null
>> +++ b/arch/arm/mach-berlin/Kconfig
>> @@ -0,0 +1,30 @@
>> +config ARCH_BERLIN
>> + bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
>> + select GENERIC_CLOCKEVENTS
>> + select GENERIC_IRQ_CHIP
>> + select COMMON_CLK
>> + select DW_APB_ICTL
>> + select DW_APB_TIMER_OF
>> +
>> +if ARCH_BERLIN
>> +
>> +menu "Marvell Berlin SoC variants"
>> +
>> +config MACH_BERLIN_BG2
>> + bool "Marvell Armada 1500 (BG2)"
>> + select ARM_GIC
> ARM_GIC is common on berlin SoCs. we can put it below ARCH_BERLIN?

Sure, I guess BG3 is also using GIC?

>> + select CACHE_L2X0
> ditto

You already re-replied to that. I leave L2X0 here, BG3 will be
different, as you stated.

>> + select CPU_PJ4B
>> + select HAVE_ARM_TWD
>> + select HAVE_SMP
>> +
>> +config MACH_BERLIN_BG2CD
>> + bool "Marvell Armada 1500-mini (BG2CD)"
>> + select ARM_GIC
>> + select CACHE_L2X0
>> + select CPU_V7
>> + select HAVE_ARM_TWD
> BG2CD is single core, I'm not sure it have twd. I will check with SoC people.
> But can twd be really used in single CA9 system?

From a quick view into Cortex-A9 MPCore TRM, I cannot see why it
shouldn't be there even for single-core. If you can get more info,
that would be great.

Actually, IIRC smp_twd does not compile without SMP set, so the above
should at least be 'HAVE_ARM_TWD if SMP'. If you shrink MULTI_V7 down
to non-SMP cores, you can disable it and it will fail to compile.

>> +
>> +endmenu
>> +
>> +endif
>> diff --git a/arch/arm/mach-berlin/Makefile b/arch/arm/mach-berlin/Makefile
>> new file mode 100644
>> index 0000000..ab69fe9
>> --- /dev/null
>> +++ b/arch/arm/mach-berlin/Makefile
>> @@ -0,0 +1 @@
>> +obj-y += berlin.o
>> diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
>> new file mode 100644
>> index 0000000..16c2942
>> --- /dev/null
>> +++ b/arch/arm/mach-berlin/berlin.c
>> @@ -0,0 +1,39 @@
>> +/*
>> + * Device Tree support for Marvell Berlin SoCs.
>> + *
>> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>> + *
>> + * based on GPL'ed 2.6 kernel sources
>> + * (c) Marvell International Ltd.
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/of_platform.h>
>> +#include <asm/hardware/cache-l2x0.h>
>> +#include <asm/mach/arch.h>
>> +
>> +static void __init berlin_init_machine(void)
>> +{
>> + /*
>> + * with DT probing for L2CCs, berlin_init_machine can be removed.
>> + * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
>> + */
>> + l2x0_of_init(0x70c00000, 0xfeffffff);
> Per my experience, put l2x0 initialization in init_machine is too late. It
> did cause some boot stability problems during our product massive bootup test.
> In our internal 3.10.y tree, we put it in init_early, I also suggest we do
> this too in mainline.
Ok.

>> + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> If l2 initialization is put in init_early, this is not needed any more.

Right, that's already in the comment right above l2x0_of_init ;)

>> +}
>> +
>> +static const char * const berlin_dt_compat[] = {
>> + "marvell,berlin",
>> + NULL,
>> +};
>> +
>> +DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
>> + .dt_compat = berlin_dt_compat,
>> + .init_machine = berlin_init_machine,
>> +MACHINE_END
>



\
 
 \ /
  Last update: 2013-11-07 11:41    [W:0.256 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site