| Date | Thu, 27 Sep 2012 19:58:13 -0700 | From | Anton Vorontsov <> | Subject | Re: [PATCH 55/57] power: ab8500_charger: Add UsbLineCtrl2 reference |
| |
On Tue, Sep 25, 2012 at 10:12:52AM -0600, mathieu.poirier@linaro.org wrote: > From: Marcus Cooper <marcus.xm.cooper@stericsson.com> > > When the state of USB Charge detection is changed then the calls > use a define for another register in other bank. This change > creates a new define for the correct register and removes the > magic numbers that are present. > > Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> > Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> > Reviewed-by: Hakan BERG <hakan.berg@stericsson.com> > Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> > > Conflicts: > > drivers/power/ab8500_charger.c
Stray comment.
> --- > drivers/power/ab8500_charger.c | 11 +++++------ > include/linux/mfd/abx500/ab8500-bm.h | 1 + > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c > index 7f8f362..afb4fda 100644 > --- a/drivers/power/ab8500_charger.c > +++ b/drivers/power/ab8500_charger.c > @@ -51,6 +51,7 @@ > #define VBUS_DET_DBNC1 0x01 > #define OTP_ENABLE_WD 0x01 > #define DROP_COUNT_RESET 0x01 > +#define USB_CH_DET 0x01 > > #define MAIN_CH_INPUT_CURR_SHIFT 4 > #define VBUS_IN_CURR_LIM_SHIFT 4 > @@ -2287,9 +2288,8 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work) > USB_CH_ENA, USB_CH_ENA); > /*Enable charger detection*/ > abx500_mask_and_set_register_interruptible(di->dev, > - AB8500_USB, > - AB8500_MCH_IPT_CURLVL_REG, > - 0x01, 0x01); > + AB8500_USB, AB8500_USB_LINE_CTRL2_REG, > + USB_CH_DET, USB_CH_DET); > di->invalid_charger_detect_state = 1; > /*exit and wait for new link status interrupt.*/ > return; > @@ -2300,9 +2300,8 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work) > "Invalid charger detected, state= 1\n"); > /*Stop charger detection*/ > abx500_mask_and_set_register_interruptible(di->dev, > - AB8500_USB, > - AB8500_MCH_IPT_CURLVL_REG, > - 0x01, 0x00); > + AB8500_USB, AB8500_USB_LINE_CTRL2_REG, > + USB_CH_DET, 0x00); > /*Check link status*/ > if (is_ab8500(di->parent)) > ret = abx500_get_register_interruptible(di->dev, > diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h > index 721bd6d..6b69ad5 100644 > --- a/include/linux/mfd/abx500/ab8500-bm.h > +++ b/include/linux/mfd/abx500/ab8500-bm.h > @@ -23,6 +23,7 @@ > * Bank : 0x5 > */ > #define AB8500_USB_LINE_STAT_REG 0x80 > +#define AB8500_USB_LINE_CTRL2_REG 0x82 > #define AB8500_USB_LINK1_STAT_REG 0x94 > > /* > -- > 1.7.5.4
|