lkml.org 
[lkml]   [2012]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 50/57] power: ab8500-chargalg: update battery health on safety timer exp
On Tue, Sep 25, 2012 at 10:12:47AM -0600, mathieu.poirier@linaro.org wrote:
> From: Hakan Berg <hakan.berg@stericsson.com>
>
> When the charging safety timer is elapsed the battery health is shown as "Good".
> This is misleading and also hard to distingiush problems reported on "phone
> discharges although charger is attached".
>
> When safety timer elapses that is an indication of a fault in the battery of
> some kind. Hence report as POWER_SUPPLY_HEALTH_UNSPEC_FAILURE.
>
> Signed-off-by: Hakan Berg <hakan.berg@stericsson.com>
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Reviewed-by: Arun MURTHY <arun.murthy@stericsson.com>
> Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
> ---
> drivers/power/abx500_chargalg.c | 4 ++++
> 1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
> index 4db0ef0..1df238f 100644
> --- a/drivers/power/abx500_chargalg.c
> +++ b/drivers/power/abx500_chargalg.c
> @@ -1711,6 +1711,10 @@ static int abx500_chargalg_get_property(struct power_supply *psy,
> val->intval = POWER_SUPPLY_HEALTH_COLD;
> else
> val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
> + } else if (di->charge_state == STATE_SAFETY_TIMER_EXPIRED ||
> + di->charge_state ==
> + STATE_SAFETY_TIMER_EXPIRED_INIT) {

Wrong indentation, no need to wrap lines. (You could align to
di->change_state, and thus it'll look prettier and there still wouldn't
need for line wrapping.)

> + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
> } else {
> val->intval = POWER_SUPPLY_HEALTH_GOOD;
> }
> --
> 1.7.5.4


\
 
 \ /
  Last update: 2012-09-28 05:01    [W:0.450 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site