lkml.org 
[lkml]   [2007]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subjectadding bits_per_word to struct spi_board_info to mirror struct spi_device
    the spi_device structure has a bits_per_word so that you can change
    the value on a per-device setting, yet the spi_board_info structure
    does not ... this means that the bus-specific structure has to have a
    bits_per_word member which the spi bus driver will copy into the spi
    device bits_per_word member

    is there something obvious i'm missing ? seems to me that if the
    generic spi framework respects bits_per_word on a per-spi device
    basis, then it should be exposed in the generic info structure so that
    the setting can be tracked in the boards file ...
    -mike
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-04-25 12:07    [W:0.020 / U:0.980 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site