lkml.org 
[lkml]   [2012]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv2 0/6] dw_dmac: introduce autoconfiguration
Date
Here is a patchset that allows to adapt the driver to the hardware
configuration during probe time. The hardware should have the specific optional
parameters enabled. Otherwise the driver will consider values stored in the
platform data.

Additionally it brings support of the software LLP transfers. It means that
normal linked list transfer is substituted by set of single block transfers
transparently to the user.

Since v1:
- addressed all Viresh's comments.

Andy Shevchenko (6):
dw_dmac: mark dwc_dump_chan_regs as inline
dw_dmac: fill optional encoded parameters in register structure
dw_dmac: get number of channels from hardware if possible
dw_dmac: autoconfigure block_size or use platform data
dw_dmac: autoconfigure data_width or get it via platform data
dw_dmac: introduce software emulation of LLP transfers

arch/arm/mach-spear13xx/spear13xx.c | 3 +
arch/avr32/mach-at32ap/at32ap700x.c | 3 +
drivers/dma/dw_dmac.c | 209 +++++++++++++++++++++++++++++------
drivers/dma/dw_dmac_regs.h | 46 ++++++++
include/linux/dw_dmac.h | 7 ++
5 files changed, 235 insertions(+), 33 deletions(-)

--
1.7.10.4



\
 
 \ /
  Last update: 2012-09-21 14:41    [W:0.712 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site