lkml.org 
[lkml]   [2012]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/7] dw_dmac: introduce autoconfiguration
On 9/17/2012 3:39 PM, Andy Shevchenko wrote:
> Here is a patchset that allows to adapt the driver to the hardware
> configuration during probe time. The hardware should have the specific optional
> parameters enabled. Otherwise the driver will consider values stored in the
> platform data.
>
> Additionally it brings support of the software LLP transfers. It means that
> normal linked list transfer is substituted by set of single block transfers
> transparently to the user.
>
> Comments are welcome.
>
> Andy Shevchenko (7):
> dw_dmac: mark dwc_dump_chan_regs as inline
> dw_dmac: fill optional encoded parameters in register structure
> dw_dmac: get number of channels from hardware if possible
> dw_dmac: autoconfigure block_size or use platform data
> dw_dmac: autoconfigure data_width or get it via platform data
> dw_dmac: check if controller supports LLP
> dw_dmac: introduce software emulation of LLP transfers
>
> arch/arm/mach-spear13xx/spear13xx.c | 3 +
> arch/avr32/mach-at32ap/at32ap700x.c | 3 +
> drivers/dma/dw_dmac.c | 207 +++++++++++++++++++++++++++++------
> drivers/dma/dw_dmac_regs.h | 48 ++++++++
> include/linux/dw_dmac.h | 7 ++
> 5 files changed, 235 insertions(+), 33 deletions(-)
Andy,

The (embedded) dw dma on the AP7000 indeed does not support auto
configuration (the register reads as zero) and so it needs the
platform data.

I tested the driver on AVR32 with the atmel-mci driver and it all
worked well.

I also tested the new software emulation of LLP mode by setting
nollp for each channel to true. That also worked as expected.


Tested-by: Hein Tibosch <hein_tibosch@yahoo.es>


\
 
 \ /
  Last update: 2012-09-18 10:21    [W:0.225 / U:1.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site