lkml.org 
[lkml]   [2024]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 08/17] clk: samsung: gs101: add support for cmu_hsi2
Hi André,

On Mon, 8 Apr 2024 at 15:49, André Draszik <andre.draszik@linaro.org> wrote:
>
> Hi Pete,
>
> On Thu, 2024-04-04 at 13:25 +0100, Peter Griffin wrote:
> > CMU_HSI2 is the clock management unit used for the hsi2 block.
> > HSI stands for High Speed Interface and as such it generates
> > clocks for PCIe, UFS and MMC card.
> >
> > This patch adds support for the muxes, dividers, and gates in
> > cmu_hsi2.
> >
> > CLK_GOUT_HSI2_HSI2_CMU_HSI2_PCLK is marked as CLK_IS_CRITICAL
> > as disabling it leads to an immediate system hang.
> >
> > CLK_GOUT_HSI2_SYSREG_HSI2_PCLK is also marked CLK_IS_CRITICAL.
> > A hang is not observed with fine grained clock control, but
> > UFS IP does not function with syscon controlling this clock
> > just around hsi2_sysreg register accesses.
>
> Would it make sense to add this clock to the &ufs_0 node in the DTS
> instead? Seems more natural than a clock that's constantly enabled?

Will add this to ufs node in v2.

>
> > [...]
> >
> > Updated regex for clock name mangling
> > sed \
> > -e 's|^PLL_LOCKTIME_PLL_\([^_]\+\)|fout_\L\1_pll|' \
> > \
> > -e 's|^PLL_CON0_MUX_CLKCMU_\([^_]\+\)_\(.*\)|mout_\L\1_\2|' \
> > -e 's|^PLL_CON0_PLL_\(.*\)|mout_pll_\L\1|' \
> > -e 's|^CLK_CON_MUX_MUX_CLK_\(.*\)|mout_\L\1|' \
> > -e '/^PLL_CON[1-4]_[^_]\+_/d' \
> > -e '/^[^_]\+_CMU_[^_]\+_CONTROLLER_OPTION/d' \
> > -e '/^CLKOUT_CON_BLK_[^_]\+_CMU_[^_]\+_CLKOUT0/d' \
> > \
> > -e 's|_IPCLKPORT||' \
> > -e 's|_RSTNSYNC||' \
> > -e 's|_G4X2_DWC_PCIE_CTL||' \
> > -e 's|_G4X1_DWC_PCIE_CTL||' \
> > -e 's|_PCIE_SUB_CTRL||' \
> > -e 's|_INST_0||g' \
> > -e 's|_LN05LPE||' \
> > -e 's|_TM_WRAPPER||' \
> > -e 's|_SF||' \
> > \
> > -e 's|^CLK_CON_DIV_DIV_CLK_\([^_]\+\)_\(.*\)|dout_\L\1_\2|' \
> > \
> > -e 's|^CLK_CON_BUF_CLKBUF_\([^_]\+\)_\(.*\)|gout_\L\1_\2|' \
> > -e 's|^CLK_CON_GAT_CLK_BLK_\([^_]\+\)_UID_\(.*\)|gout_\L\1_\2|' \
> > -e 's|^gout_[^_]\+_[^_]\+_cmu_\([^_]\+\)_pclk$|gout_\1_\1_pclk|' \
> > -e 's|^CLK_CON_GAT_GOUT_BLK_\([^_]\+\)_UID_\(.*\)|gout_\L\1_\2|' \
> > -e 's|^CLK_CON_GAT_CLK_\([^_]\+\)_\(.*\)|gout_\L\1_clk_\L\1_\2|' \
> > \
> > -e '/^\(DMYQCH\|PCH\|QCH\|QUEUE\)_/d'
>
> Thank you for the updated regex.
>
> > ---
> > drivers/clk/samsung/clk-gs101.c | 558 +++++++++++++++++++++++
> > include/dt-bindings/clock/google,gs101.h | 63 +++
> > 2 files changed, 621 insertions(+)
> >
> > diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c
> > index d065e343a85d..b9f84c7d5c22 100644
> > --- a/drivers/clk/samsung/clk-gs101.c
> > +++ b/drivers/clk/samsung/clk-gs101.c
> > @@ -22,6 +22,7 @@
> > #define CLKS_NR_MISC (CLK_GOUT_MISC_XIU_D_MISC_ACLK + 1)
> > #define CLKS_NR_PERIC0 (CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK + 1)
> > #define CLKS_NR_PERIC1 (CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK + 1)
> > +#define CLKS_NR_HSI2 (CLK_GOUT_HSI2_XIU_P_HSI2_ACLK + 1)
> >
> > /* ---- CMU_TOP ------------------------------------------------------------- */
> >
> > @@ -3409,6 +3410,560 @@ static const struct samsung_cmu_info peric1_cmu_info __initconst = {
> > .clk_name = "bus",
> > };
> >
> > +/* ---- CMU_HSI2 ---------------------------------------------------------- */
>
> This comment is shorter that all the other similar comments in this file.

Will fix
>
> > [...]
> > +
> > +PNAME(mout_hsi2_bus_user_p) = { "oscclk", "dout_cmu_hsi2_bus" };
> > +PNAME(mout_hsi2_pcie_user_p) = { "oscclk", "dout_cmu_hsi2_pcie" };
> > +PNAME(mout_hsi2_ufs_embd_user_p) = { "oscclk", "dout_cmu_hsi2_ufs_embd" };
> > +PNAME(mout_hsi2_mmc_card_user_p) = { "oscclk", "dout_cmu_hsi2_mmc_card" };
>
> Can you make these alphabetical, too, please, which would also match their usage
> below:

Will fix
>
> > +
> > +static const struct samsung_mux_clock hsi2_mux_clks[] __initconst = {
> > + MUX(CLK_MOUT_HSI2_BUS_USER, "mout_hsi2_bus_user", mout_hsi2_bus_user_p,
> > + PLL_CON0_MUX_CLKCMU_HSI2_BUS_USER, 4, 1),
> > + MUX(CLK_MOUT_HSI2_MMC_CARD_USER, "mout_hsi2_mmc_card_user",
> > + mout_hsi2_mmc_card_user_p, PLL_CON0_MUX_CLKCMU_HSI2_MMC_CARD_USER,
> > + 4, 1),
> > + MUX(CLK_MOUT_HSI2_PCIE_USER, "mout_hsi2_pcie_user",
> > + mout_hsi2_pcie_user_p, PLL_CON0_MUX_CLKCMU_HSI2_PCIE_USER,
> > + 4, 1),
> > + MUX(CLK_MOUT_HSI2_UFS_EMBD_USER, "mout_hsi2_ufs_embd_user",
> > + mout_hsi2_ufs_embd_user_p, PLL_CON0_MUX_CLKCMU_HSI2_UFS_EMBD_USER,
> > + 4, 1),
> > +};
> > +
> > +static const struct samsung_gate_clock hsi2_gate_clks[] __initconst = {
> > +
>
> Here and below: all these extra empty lines are not needed.

Will fix
>
> > + GATE(CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_PHY_REFCLK_IN,
> > + "gout_hsi2_pcie_gen4_1_pcie_003_phy_refclk_in",
> > + "mout_hsi2_pcie_user",
> > + CLK_CON_GAT_CLK_BLK_HSI2_UID_PCIE_GEN4_1_IPCLKPORT_PCIE_003_PCIE_SUB_CTRL_INST_0_PHY_REFCLK_IN,
> > + 21, 0, 0),
> > +
> > + GATE(CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_PHY_REFCLK_IN,
> > + "gout_hsi2_pcie_gen4_1_pcie_004_phy_refclk_in",
> > + "mout_hsi2_pcie_user",
> > + CLK_CON_GAT_CLK_BLK_HSI2_UID_PCIE_GEN4_1_IPCLKPORT_PCIE_004_PCIE_SUB_CTRL_INST_0_PHY_REFCLK_IN,
> > + 21, 0, 0),
> > +
> > + GATE(CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4A_1_ACLK,
> > + "gout_hsi2_ssmt_pcie_ia_gen4a_1_aclk",
> > + "mout_hsi2_bus_user",
>
> The two strings fit on the same line.

Will fix
>
> > + CLK_CON_GAT_CLK_BLK_HSI2_UID_SSMT_PCIE_IA_GEN4A_1_IPCLKPORT_ACLK,
> > + 21, 0, 0),
> > +
> > + GATE(CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4A_1_PCLK,
> > + "gout_hsi2_ssmt_pcie_ia_gen4a_1_pclk",
> > + "mout_hsi2_bus_user",
>
> dito.

Will fix

regards,

Peter


>
> > [...]
> > + /* Disabling this clock makes the system hang. Mark the clock as critical. */
> > + GATE(CLK_GOUT_HSI2_HSI2_CMU_HSI2_PCLK,
> > + "gout_hsi2_hsi2_cmu_hsi2_pclk", "mout_hsi2_bus_user",
> > + CLK_CON_GAT_GOUT_BLK_HSI2_UID_HSI2_CMU_HSI2_IPCLKPORT_PCLK,
> > + 21, CLK_IS_CRITICAL, 0),
>
> I have a similar clock in USB, which also causes a hang if off, I wonder what we
> could do better here.
>
>
> Cheers,
> Andre'
>

\
 
 \ /
  Last update: 2024-04-23 19:46    [W:0.664 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site