lkml.org 
[lkml]   [2024]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: ipq8074: Remove unused gpio from QPIC pins
Date
gpio16 will only be used for LCD support, as its NAND/LCDC data[8]
so its bit 9 of the parallel QPIC interface, and ONFI NAND is only 8
or 16-bit with only 8-bit one being supported in our case so that pin
is unused.

It should be dropped from the default NAND pinctrl configuration
as its unused and only needed for LCD.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index e5b89753aa5c..8bed34174460 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -349,7 +349,7 @@ qpic_pins: qpic-state {
"gpio5", "gpio6", "gpio7",
"gpio8", "gpio10", "gpio11",
"gpio12", "gpio13", "gpio14",
- "gpio15", "gpio16", "gpio17";
+ "gpio15", "gpio17";
function = "qpic";
drive-strength = <8>;
bias-disable;
--
2.44.0

\
 
 \ /
  Last update: 2024-03-13 11:28    [W:0.137 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site