lkml.org 
[lkml]   [2024]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] arm64: dts: qcom: ipq8074: Remove unused gpio from QPIC pins
From


On 3/13/2024 3:57 PM, Paweł Owoc wrote:
> gpio16 will only be used for LCD support, as its NAND/LCDC data[8]
> so its bit 9 of the parallel QPIC interface, and ONFI NAND is only 8
> or 16-bit with only 8-bit one being supported in our case so that pin
> is unused.
>
> It should be dropped from the default NAND pinctrl configuration
> as its unused and only needed for LCD.


Matches with downstream.

Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>


>
> Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
> ---
> arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index e5b89753aa5c..8bed34174460 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -349,7 +349,7 @@ qpic_pins: qpic-state {
> "gpio5", "gpio6", "gpio7",
> "gpio8", "gpio10", "gpio11",
> "gpio12", "gpio13", "gpio14",
> - "gpio15", "gpio16", "gpio17";
> + "gpio15", "gpio17";
> function = "qpic";
> drive-strength = <8>;
> bias-disable;

\
 
 \ /
  Last update: 2024-05-27 15:52    [W:0.404 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site