Messages in this thread | | | From | Konrad Dybcio <> | Subject | [PATCH 0/8] Flush RSC votes properly on more RPMh platforms | Date | Wed, 31 May 2023 15:22:34 +0200 |
| |
As pointed out in [1], the Linux implementation of RSC basically requires (even if not explicitly) that we point it to a power domain which represents the power state of the CPUs. In an effort to fulfill that requirement, make it required in bindings and hook it up on all platforms where I was able to do. This means all RPMh platforms, except
- SC7180 - SC7280 - SA8775
As there wasn't an idle-states setup (which may be on purpose for CrOS devices, certainly not for Windows SC7[12]80s) that I could validate. (Doug, Bartosz, could you guys look into your respective platforms of interest here?)
This series also adds support for idle states on SM6350, as I was able to add and test that.
[1] https://lore.kernel.org/linux-arm-msm/20230512150425.3171122-1-quic_bjorande@quicinc.com/
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- Konrad Dybcio (8): dt-bindings: soc: qcom,rpmh-rsc: Require power-domains arm64: dts: qcom: sm6350: Add PSCI idle states arm64: dts: qcom: qdu1000: Flush RSC sleep & wake votes arm64: dts: qcom: sc8180x: Flush RSC sleep & wake votes arm64: dts: qcom: sdm670: Flush RSC sleep & wake votes arm64: dts: qcom: sdm845: Flush RSC sleep & wake votes arm64: dts: qcom: sm6350: Flush RSC sleep & wake votes arm64: dts: qcom: sm8550: Flush RSC sleep & wake votes
.../bindings/soc/qcom/qcom,rpmh-rsc.yaml | 2 + arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1 + arch/arm64/boot/dts/qcom/sc8180x.dtsi | 1 + arch/arm64/boot/dts/qcom/sdm670.dtsi | 1 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 + arch/arm64/boot/dts/qcom/sm6350.dtsi | 142 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/sm8550.dtsi | 1 + 7 files changed, 149 insertions(+) --- base-commit: d4cee89031c80066ec461bb77b5e13a4f37d5fd2 change-id: 20230531-topic-rsc-35e838da9afb
Best regards, -- Konrad Dybcio <konrad.dybcio@linaro.org>
| |