lkml.org 
[lkml]   [2023]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2] net: mvpp2: add support for mii
Date
Currently, mvpp2 only supports RGMII. This commit adds support for MII.
The description in Marvell's functional specification seems to be wrong.
To enable MII, we need to set GENCONF_CTRL0_PORT3_RGMII, while for RGMII
we need to clear it. This is also how U-Boot handles it.

Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
---
v2:
- Remove PHY_INTERFACE_MODE_100BASEX from supported_interfaces (Maxime)
---
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 21 ++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 93137606869e..c5f72a1ef928 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1513,10 +1513,21 @@ static void mvpp22_gop_init_rgmii(struct mvpp2_port *port)
regmap_write(priv->sysctrl_base, GENCONF_PORT_CTRL0, val);

regmap_read(priv->sysctrl_base, GENCONF_CTRL0, &val);
- if (port->gop_id == 2)
+ if (port->gop_id == 2) {
val |= GENCONF_CTRL0_PORT2_RGMII;
- else if (port->gop_id == 3)
+ } else if (port->gop_id == 3) {
val |= GENCONF_CTRL0_PORT3_RGMII_MII;
+
+ /* According to the specification, GENCONF_CTRL0_PORT3_RGMII
+ * should be set to 1 for RGMII and 0 for MII. However, tests
+ * show that it is the other way around. This is also what
+ * U-Boot does for mvpp2, so it is assumed to be correct.
+ */
+ if (port->phy_interface == PHY_INTERFACE_MODE_MII)
+ val |= GENCONF_CTRL0_PORT3_RGMII;
+ else
+ val &= ~GENCONF_CTRL0_PORT3_RGMII;
+ }
regmap_write(priv->sysctrl_base, GENCONF_CTRL0, val);
}

@@ -1615,6 +1626,7 @@ static int mvpp22_gop_init(struct mvpp2_port *port, phy_interface_t interface)
return 0;

switch (interface) {
+ case PHY_INTERFACE_MODE_MII:
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
@@ -6948,8 +6960,11 @@ static int mvpp2_port_probe(struct platform_device *pdev,
MAC_10000FD;
}

- if (mvpp2_port_supports_rgmii(port))
+ if (mvpp2_port_supports_rgmii(port)) {
phy_interface_set_rgmii(port->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_MII,
+ port->phylink_config.supported_interfaces);
+ }

if (comphy) {
/* If a COMPHY is present, we can support any of the
--
2.40.1
\
 
 \ /
  Last update: 2023-12-12 15:13    [W:0.072 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site