lkml.org 
[lkml]   [2023]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v8 07/16] x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory
From
On 12/8/22 22:52, Kai Huang wrote:
> As a step of initializing the TDX module, the kernel needs to tell the
> TDX module which memory regions can be used by the TDX module as TDX
> guest memory.
>
> TDX reports a list of "Convertible Memory Region" (CMR) to tell the
> kernel which memory is TDX compatible. The kernel needs to build a list
> of memory regions (out of CMRs) as "TDX-usable" memory and pass them to
> the TDX module. Once this is done, those "TDX-usable" memory regions
> are fixed during module's lifetime.
>
> The initial support of TDX guests will only allocate TDX guest memory
> from the global page allocator. To keep things simple, just make sure
> all pages in the page allocator are TDX memory.

It's hard to tell what "The initial support of TDX guests" means. I
*think* you mean "this series". But, we try not to say "this blah" too
much, so just say this:

To keep things simple, assume that all TDX-protected memory will
comes page allocator. Make sure all pages in the page allocator
*are* TDX-usable memory.

> To guarantee that, stash off the memblock memory regions at the time of
> initializing the TDX module as TDX's own usable memory regions, and in
> the meantime, register a TDX memory notifier to reject to online any new
> memory in memory hotplug.

First, this is a run-on sentence. Second, it isn't really clear what
memblocks have to do with this or why you need to stash them off.
Please explain.

> This approach works as in practice all boot-time present DIMMs are TDX
> convertible memory. However, if any non-TDX-convertible memory has been
> hot-added (i.e. CXL memory via kmem driver) before initializing the TDX
> module, the module initialization will fail.

I really don't know what this is trying to say.

*How* and *why* does this module initialization failure occur? How do
you implement it and why is it necessary?

> This can also be enhanced in the future, i.e. by allowing adding non-TDX
> memory to a separate NUMA node. In this case, the "TDX-capable" nodes
> and the "non-TDX-capable" nodes can co-exist, but the kernel/userspace
> needs to guarantee memory pages for TDX guests are always allocated from
> the "TDX-capable" nodes.

Why does it need to be enhanced? What's the problem?

> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index dd333b46fafb..b36129183035 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -1959,6 +1959,7 @@ config INTEL_TDX_HOST
> depends on X86_64
> depends on KVM_INTEL
> depends on X86_X2APIC
> + select ARCH_KEEP_MEMBLOCK
> help
> Intel Trust Domain Extensions (TDX) protects guest VMs from malicious
> host and certain physical attacks. This option enables necessary TDX
> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> index 216fee7144ee..3a841a77fda4 100644
> --- a/arch/x86/kernel/setup.c
> +++ b/arch/x86/kernel/setup.c
> @@ -1174,6 +1174,8 @@ void __init setup_arch(char **cmdline_p)
> *
> * Moreover, on machines with SandyBridge graphics or in setups that use
> * crashkernel the entire 1M is reserved anyway.
> + *
> + * Note the host kernel TDX also requires the first 1MB being reserved.
> */
> reserve_real_mode();
>
> diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
> index 6fe505c32599..f010402f443d 100644
> --- a/arch/x86/virt/vmx/tdx/tdx.c
> +++ b/arch/x86/virt/vmx/tdx/tdx.c
> @@ -13,6 +13,13 @@
> #include <linux/errno.h>
> #include <linux/printk.h>
> #include <linux/mutex.h>
> +#include <linux/list.h>
> +#include <linux/slab.h>
> +#include <linux/memblock.h>
> +#include <linux/memory.h>
> +#include <linux/minmax.h>
> +#include <linux/sizes.h>
> +#include <linux/pfn.h>
> #include <asm/pgtable_types.h>
> #include <asm/msr.h>
> #include <asm/tdx.h>
> @@ -25,6 +32,12 @@ enum tdx_module_status_t {
> TDX_MODULE_ERROR
> };
>
> +struct tdx_memblock {
> + struct list_head list;
> + unsigned long start_pfn;
> + unsigned long end_pfn;
> +};
> +
> static u32 tdx_keyid_start __ro_after_init;
> static u32 nr_tdx_keyids __ro_after_init;
>
> @@ -32,6 +45,9 @@ static enum tdx_module_status_t tdx_module_status;
> /* Prevent concurrent attempts on TDX detection and initialization */
> static DEFINE_MUTEX(tdx_module_lock);
>
> +/* All TDX-usable memory regions */
> +static LIST_HEAD(tdx_memlist);
> +
> /*
> * tdx_keyid_start and nr_tdx_keyids indicate that TDX is uninitialized.
> * This is used in TDX initialization error paths to take it from
> @@ -69,6 +85,50 @@ static int __init record_keyid_partitioning(void)
> return 0;
> }
>
> +static bool is_tdx_memory(unsigned long start_pfn, unsigned long end_pfn)
> +{
> + struct tdx_memblock *tmb;
> +
> + /* Empty list means TDX isn't enabled. */
> + if (list_empty(&tdx_memlist))
> + return true;
> +
> + list_for_each_entry(tmb, &tdx_memlist, list) {
> + /*
> + * The new range is TDX memory if it is fully covered by
> + * any TDX memory block.
> + *
> + * Note TDX memory blocks are originated from memblock
> + * memory regions, which can only be contiguous when two
> + * regions have different NUMA nodes or flags. Therefore
> + * the new range cannot cross multiple TDX memory blocks.
> + */
> + if (start_pfn >= tmb->start_pfn && end_pfn <= tmb->end_pfn)
> + return true;
> + }
> + return false;
> +}

I don't really like that comment. It should first state its behavior
and assumptions, like:

This check assumes that the start_pfn<->end_pfn range does not
cross multiple tdx_memlist entries.

Only then should it describe why that is OK:

A single memory hotplug even across mutliple memblocks (from
which tdx_memlist entries are derived) is impossible. ... then
actually explain



> +static int tdx_memory_notifier(struct notifier_block *nb, unsigned long action,
> + void *v)
> +{
> + struct memory_notify *mn = v;
> +
> + if (action != MEM_GOING_ONLINE)
> + return NOTIFY_OK;
> +
> + /*
> + * Not all memory is compatible with TDX. Reject
> + * to online any incompatible memory.
> + */

This comment isn't quite right either. There might actually be totally
TDX *compatible* memory here. It just wasn't configured for use with TDX.

Shouldn't this be something more like:

/*
* The TDX memory configuration is static and can not be
* changed. Reject onlining any memory which is outside
* of the static configuration whether it supports TDX or not.
*/

> + return is_tdx_memory(mn->start_pfn, mn->start_pfn + mn->nr_pages) ?
> + NOTIFY_OK : NOTIFY_BAD;
> +}
> +
> +static struct notifier_block tdx_memory_nb = {
> + .notifier_call = tdx_memory_notifier,
> +};
> +
> static int __init tdx_init(void)
> {
> int err;
> @@ -89,6 +149,13 @@ static int __init tdx_init(void)
> goto no_tdx;
> }
>
> + err = register_memory_notifier(&tdx_memory_nb);
> + if (err) {
> + pr_info("initialization failed: register_memory_notifier() failed (%d)\n",
> + err);
> + goto no_tdx;
> + }
> +
> return 0;
> no_tdx:
> clear_tdx();
> @@ -209,6 +276,77 @@ static int tdx_get_sysinfo(struct tdsysinfo_struct *sysinfo,
> return 0;
> }
>
> +/*
> + * Add a memory region as a TDX memory block. The caller must make sure
> + * all memory regions are added in address ascending order and don't
> + * overlap.
> + */
> +static int add_tdx_memblock(struct list_head *tmb_list, unsigned long start_pfn,
> + unsigned long end_pfn)
> +{
> + struct tdx_memblock *tmb;
> +
> + tmb = kmalloc(sizeof(*tmb), GFP_KERNEL);
> + if (!tmb)
> + return -ENOMEM;
> +
> + INIT_LIST_HEAD(&tmb->list);
> + tmb->start_pfn = start_pfn;
> + tmb->end_pfn = end_pfn;
> +
> + list_add_tail(&tmb->list, tmb_list);
> + return 0;
> +}
> +
> +static void free_tdx_memlist(struct list_head *tmb_list)
> +{
> + while (!list_empty(tmb_list)) {
> + struct tdx_memblock *tmb = list_first_entry(tmb_list,
> + struct tdx_memblock, list);
> +
> + list_del(&tmb->list);
> + kfree(tmb);
> + }
> +}

'tdx_memlist' is written only once at boot and then is read-only, right?

It might be nice to mention that so that the lack of locking doesn't
look problematic.

> +/*
> + * Ensure that all memblock memory regions are convertible to TDX
> + * memory. Once this has been established, stash the memblock
> + * ranges off in a secondary structure because memblock is modified
> + * in memory hotplug while TDX memory regions are fixed.
> + */

Ahh, that's why we need to "shadow" the memblocks. Can you add a
sentence on this to the changelog, please?

> +static int build_tdx_memlist(struct list_head *tmb_list)
> +{
> + unsigned long start_pfn, end_pfn;
> + int i, ret;
> +
> + for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
> + /*
> + * The first 1MB is not reported as TDX convertible memory.
> + * Although the first 1MB is always reserved and won't end up
> + * to the page allocator, it is still in memblock's memory
> + * regions. Skip them manually to exclude them as TDX memory.
> + */
> + start_pfn = max(start_pfn, PHYS_PFN(SZ_1M));
> + if (start_pfn >= end_pfn)
> + continue;
> +
> + /*
> + * Add the memory regions as TDX memory. The regions in
> + * memblock has already guaranteed they are in address
> + * ascending order and don't overlap.
> + */
> + ret = add_tdx_memblock(tmb_list, start_pfn, end_pfn);
> + if (ret)
> + goto err;
> + }
> +
> + return 0;
> +err:
> + free_tdx_memlist(tmb_list);
> + return ret;
> +}
> +
> static int init_tdx_module(void)
> {
> /*
> @@ -226,10 +364,25 @@ static int init_tdx_module(void)
> if (ret)
> goto out;
>
> + /*
> + * The initial support of TDX guests only allocates memory from
> + * the global page allocator. To keep things simple, just make
> + * sure all pages in the page allocator are TDX memory.

I didn't like this in the changelog either. Try to make this "timeless"
rather than refer to what the support is today. I gave you example text
above.

> + * Build the list of "TDX-usable" memory regions which cover all
> + * pages in the page allocator to guarantee that. Do it while
> + * holding mem_hotplug_lock read-lock as the memory hotplug code
> + * path reads the @tdx_memlist to reject any new memory.
> + */
> + get_online_mems();

Oh, it actually uses the memory hotplug locking for list protection.
That's at least a bit subtle. Please document that somewhere in the
functions that actually manipulate the list.

I think it's also worth saying something here about the high-level
effects of what's going on:

Take a snapshot of the memory configuration (memblocks). This
snapshot will be used to enable TDX support for *this* memory
configuration only. Use a memory hotplug notifier to ensure
that no other RAM can be added outside of this configuration.

That's it, right?

> + ret = build_tdx_memlist(&tdx_memlist);
> + if (ret)
> + goto out;
> +
> /*
> * TODO:
> *
> - * - Build the list of TDX-usable memory regions.
> * - Construct a list of TDMRs to cover all TDX-usable memory
> * regions.
> * - Pick up one TDX private KeyID as the global KeyID.
> @@ -241,6 +394,11 @@ static int init_tdx_module(void)
> */
> ret = -EINVAL;
> out:
> + /*
> + * @tdx_memlist is written here and read at memory hotplug time.
> + * Lock out memory hotplug code while building it.
> + */
> + put_online_mems();
> return ret;
> }

You would also be wise to have the folks who do a lot of memory hotplug
work today look at this sooner rather than later. I _think_ what you
have here is OK, but I'm really rusty on the code itself.

\
 
 \ /
  Last update: 2023-03-26 23:31    [W:0.491 / U:1.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site