lkml.org 
[lkml]   [2022]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 00/22] Add driver nodes for MT8192 SoC
Date
Add driver nodes for MT8192 SoC and this series are based on tag: next-20220318, linux-next/master.

The current mmsys dt-binding,
Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml, doesn't define mboxes or mediatek,gce-client-reg.
Need to reference the below link
https://urldefense.com/v3/__https://lore.kernel.org/all/20220126071932.32615-2-jason-jh.lin@mediatek.com/__;!!CTRNKA9wMg0ARbw!zNfQkN-YYjiqPCd5m9DsLhrQDymgEZJoY4oSl24nC3R95P0gIXEmNjyJMhjQZXkWX7mZPa5QS7KIMlGXMbDjDA1_2A$

changes since v3:
- add patch: add the mmsys reset bit to reset the dsi0
- dsi0: use mmsys for reset controller support
- mmc: reorder clocks as specified in the dt-bindings
- vcodec: use ranges for regs of subnodes

changes since v2:
- rebase on next-20220304
- remove power domains controller patch from series (already in linux-next)
- scp: fix indentation
- t-phy: change node name from usb-phy to t-phy and set ranges address
- usb: change node name from xhci to usb and add disabled status
- audsys: syscon: add increasing the address range's length info in commit message
- infracfg_rst: add simple-mfd info in commit message
- nor_flash: add Fixes tag d0a197a0d064a in commit message
- efuse: use lower case characters
- mmc: use single line for reg
- mipi_tx: change node name from mipi-dphy to dsi-phy, drop clock-names and add disabled status
- m4u and smi: fixing the formatting of the mediatek,larbs properties and remove smi-id property
- H264 venc: fix indentation, remove '0x' prefix for node address
- vcodec lat and core: use '-' instead of '_' in the node name, fix indentation and
set mtk-vcodec-lat and mtk-vcodec-core as subnodes of vcodec-dec
- dpi: add disabled status
- display: appended "mediatek,mt8183-disp-aal" for ccorr
- dsi: fix indentation and add disabled status
- gce info: add drivers' CMDQ support inn commit message
- pwm: add disabled status
- i2c aliases: move the aliases at the board level.

changes since v1:
- add usb-phy node for xhci node
- move infracfg_rst patch in front of PCIe patch
- add display nodes, i2c aliases and pwm node.

Allen-KH Cheng (22):
arm64: dts: mt8192: Add pwrap node
arm64: dts: mt8192: Add spmi node
arm64: dts: mt8192: Add gce node
arm64: dts: mt8192: Add SCP node
arm64: dts: mt8192: Add usb-phy node
arm64: dts: mt8192: Add xhci node
arm64: dts: mt8192: Add audio-related nodes
arm64: dts: mt8192: Add infracfg_rst node
arm64: dts: mt8192: Add PCIe node
arm64: dts: mt8192: Fix nor_flash status disable typo
arm64: dts: mt8192: Add efuse node
arm64: dts: mt8192: Add mmc device nodes
arm64: dts: mt8192: Add mipi_tx node
arm64: dts: mt8192: Add m4u and smi nodes
arm64: dts: mt8192: Add H264 venc device node
arm64: dts: mt8192: Add vcodec lat and core nodes
arm64: dts: mt8192: Add dpi node
arm64: dts: mt8192: Add display nodes
arm64: dts: mt8192: Add the mmsys reset bit to reset the dsi0
arm64: dts: mt8192: Add dsi node
arm64: dts: mt8192: Add gce info for display nodes
arm64: dts: mt8192: Add pwm node

arch/arm64/boot/dts/mediatek/mt8192.dtsi | 783 +++++++++++++++++++++-
include/dt-bindings/reset/mt8192-resets.h | 3 +
2 files changed, 775 insertions(+), 11 deletions(-)

--
2.18.0

\
 
 \ /
  Last update: 2022-03-18 15:46    [W:0.566 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site