lkml.org 
[lkml]   [2022]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] ARM: r9a06g032: add support for the watchdogs
Date
Hi all,

This series adds support for the watchdog timers of the RZ/N1.
The watchdog driver (rzn1-wdt.c) is derived from the driver available at
https://github.com/renesas-rz/rzn1_linux.git with a few modifications
(devm watchdog API usage and WDIOF_MAGICCLOSE option)

In order to be able to reset the board when a watchdog timer expires,
the RSTEN register must be configured. This is done in the clock
driver of the r9a06g032. The rationnal is that this driver is the only one
that handles the sysctrl for this platform and there are a couple of other
clock drivers that also handle resets/reboot. I intend to later post
another patch to add software-triggered reboot capability that will
leverage this change.


Jean-Jacques Hiblot (5):
clk: renesas: r9a06g032: Enable the watchdog reset sources
dt-bindings: clock: r9a06g032: Add the definition of the watchdog
clock
dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
ARM: dts: r9a06g032: Add the watchdog nodes
ARM: dts: r9a06g032-rzn1d400-db: Enable watchdog0 with a 10s timeout

Phil Edworthy (1):
watchdog: Add Renesas RZ/N1 Watchdog driver

.../bindings/watchdog/renesas,wdt.yaml | 4 +
arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 5 +
arch/arm/boot/dts/r9a06g032.dtsi | 16 ++
drivers/clk/renesas/r9a06g032-clocks.c | 33 +++
drivers/watchdog/Kconfig | 8 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/rzn1_wdt.c | 197 ++++++++++++++++++
include/dt-bindings/clock/r9a06g032-sysctrl.h | 1 +
8 files changed, 265 insertions(+)
create mode 100644 drivers/watchdog/rzn1_wdt.c

--
2.25.1

\
 
 \ /
  Last update: 2022-02-04 17:19    [W:0.642 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site