lkml.org 
[lkml]   [2022]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 04/15] spi: dw: add check for support of enhanced spi
Date
Before doing the mem op, spi controller will be queried about the
buswidths it supports. Add the dual/quad/octal if the controller
has the DW_SPI_CAP_EMODE capability.
The DW_SPI_CAP_EMODE capability will be enabled in a later patch.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@sifive.com>
---
drivers/spi/spi-dw-core.c | 25 ++++++++++++++++++++++++-
drivers/spi/spi-dw.h | 1 +
2 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index d59401f16c47a..49fad58ceb94a 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -510,6 +510,26 @@ static int dw_spi_adjust_mem_op_size(struct spi_mem *mem, struct spi_mem_op *op)
return 0;
}

+static bool dw_spi_supports_enh_mem_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ if (op->addr.nbytes != 0 && op->addr.buswidth != 1 &&
+ op->addr.buswidth != op->data.buswidth)
+ return false;
+
+ if (op->cmd.buswidth != 1 && op->cmd.buswidth != op->addr.buswidth &&
+ op->cmd.buswidth != op->data.buswidth)
+ return false;
+
+ if (op->dummy.nbytes != 0 && op->data.dir == SPI_MEM_DATA_OUT)
+ return false;
+
+ if (op->dummy.nbytes != 0 && op->dummy.nbytes / op->dummy.buswidth > 4)
+ return false;
+
+ return spi_mem_default_supports_op(mem, op);
+}
+
static bool dw_spi_supports_mem_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
@@ -792,7 +812,10 @@ static void dw_spi_init_mem_ops(struct dw_spi *dws)
if (!dws->mem_ops.exec_op && !(dws->caps & DW_SPI_CAP_CS_OVERRIDE) &&
!dws->set_cs) {
dws->mem_ops.adjust_op_size = dw_spi_adjust_mem_op_size;
- dws->mem_ops.supports_op = dw_spi_supports_mem_op;
+ if (dws->caps & DW_SPI_CAP_EMODE)
+ dws->mem_ops.supports_op = dw_spi_supports_enh_mem_op;
+ else
+ dws->mem_ops.supports_op = dw_spi_supports_mem_op;
dws->mem_ops.exec_op = dw_spi_exec_mem_op;
if (!dws->max_mem_freq)
dws->max_mem_freq = dws->max_freq;
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index f29d89d05f34b..327d037bdb10e 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -34,6 +34,7 @@
/* DW SPI controller capabilities */
#define DW_SPI_CAP_CS_OVERRIDE BIT(0)
#define DW_SPI_CAP_DFS32 BIT(1)
+#define DW_SPI_CAP_EMODE BIT(2)

/* Register offsets (Generic for both DWC APB SSI and DWC SSI IP-cores) */
#define DW_SPI_CTRLR0 0x00
--
2.30.2
\
 
 \ /
  Last update: 2022-12-12 19:09    [W:0.703 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site