lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 126/606] iio: light: isl29028: Convert to i2c's .probe_new()
Date
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/iio/light/isl29028.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/light/isl29028.c b/drivers/iio/light/isl29028.c
index 32d58e18f26d..bcf3a556e41a 100644
--- a/drivers/iio/light/isl29028.c
+++ b/drivers/iio/light/isl29028.c
@@ -565,9 +565,9 @@ static const struct regmap_config isl29028_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};

-static int isl29028_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int isl29028_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct isl29028_chip *chip;
struct iio_dev *indio_dev;
int ret;
@@ -698,7 +698,7 @@ static struct i2c_driver isl29028_driver = {
.pm = pm_ptr(&isl29028_pm_ops),
.of_match_table = isl29028_of_match,
},
- .probe = isl29028_probe,
+ .probe_new = isl29028_probe,
.remove = isl29028_remove,
.id_table = isl29028_id,
};
--
2.38.1
\
 
 \ /
  Last update: 2022-11-18 23:56    [W:1.952 / U:3.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site