lkml.org 
[lkml]   [2022]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    SubjectRe: [PATCH 109/606] iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
    Date
    Hello,

    looks good, thanks for the patch.

    Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>

    Best regards,
    JB


    From: Uwe Kleine-König <uwe@kleine-koenig.org>
    Sent: Friday, November 18, 2022 23:37
    To: Angel Iglesias <ang.iglesiasg@gmail.com>; Lee Jones <lee.jones@linaro.org>; Grant Likely <grant.likely@linaro.org>; Wolfram Sang <wsa@kernel.org>; Jonathan Cameron <jic23@kernel.org>; Andy Shevchenko <andriy.shevchenko@linux.intel.com>; Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@tdk.com>; Hans Verkuil <hverkuil-cisco@xs4all.nl>; Michael Srba <Michael.Srba@seznam.cz>
    Cc: linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; kernel@pengutronix.de <kernel@pengutronix.de>; Uwe Kleine-König <u.kleine-koenig@pengutronix.de>; Lars-Peter Clausen <lars@metafoo.de>; linux-iio@vger.kernel.org <linux-iio@vger.kernel.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
    Subject: [PATCH 109/606] iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
     
    [CAUTION] This is an EXTERNAL email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

    ======================================================================
    From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    .probe_new() doesn't get the i2c_device_id * parameter, so determine
    that explicitly in the probe function.

    Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    ---
     drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 6 +++---
     1 file changed, 3 insertions(+), 3 deletions(-)

    diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
    index 7a8d60a5afa9..70eaa408e388 100644
    --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
    +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
    @@ -95,9 +95,9 @@ static int inv_mpu_i2c_aux_setup(struct iio_dev *indio_dev)
      *
      *  Returns 0 on success, a negative error code otherwise.
      */
    -static int inv_mpu_probe(struct i2c_client *client,
    -                        const struct i2c_device_id *id)
    +static int inv_mpu_probe(struct i2c_client *client)
     {
    +       const struct i2c_device_id *id = i2c_client_get_device_id(client);
             const void *match;
             struct inv_mpu6050_state *st;
             int result;
    @@ -260,7 +260,7 @@ static const struct acpi_device_id inv_acpi_match[] = {
     MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
     
     static struct i2c_driver inv_mpu_driver = {
    -       .probe          =       inv_mpu_probe,
    +       .probe_new      =       inv_mpu_probe,
             .remove         =       inv_mpu_remove,
             .id_table       =       inv_mpu_id,
             .driver = {
    --
    2.38.1

    \
     
     \ /
      Last update: 2022-11-22 11:09    [W:4.026 / U:0.204 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site