lkml.org 
[lkml]   [2021]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] thermal: qcom: spmi-adc-tm5: Don't abort probing if a sensor is not used
Date
adc_tm5_register_tzd() registers the thermal zone sensors for all
channels of the thermal monitor. If the registration of one channel
fails the function skips the processing of the remaining channels
and returns an error, which results in _probe() being aborted.

One of the reasons the registration could fail is that none of the
thermal zones is using the channel/sensor, which hardly is a critical
error (if it is an error at all). If this case is detected emit a
warning and continue with processing the remaining channels.

Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index 232fd0b33325..8494cc04aa21 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -359,6 +359,12 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
&adc_tm->channels[i],
&adc_tm5_ops);
if (IS_ERR(tzd)) {
+ if (PTR_ERR(tzd) == -ENODEV) {
+ dev_warn(adc_tm->dev, "thermal sensor on channel %d is not used\n",
+ adc_tm->channels[i].channel);
+ continue;
+ }
+
dev_err(adc_tm->dev, "Error registering TZ zone for channel %d: %ld\n",
adc_tm->channels[i].channel, PTR_ERR(tzd));
return PTR_ERR(tzd);
--
2.33.0.rc2.250.ged5fa647cd-goog
\
 
 \ /
  Last update: 2021-08-23 22:48    [W:0.084 / U:1.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site