lkml.org 
[lkml]   [2021]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 12/24] net: stmmac: Directly call reverse methods in stmmac_probe_config_dt()
Date
Calling an antagonistic method from the corresponding protagonist isn't
good from maintainability point of view, since prevents us from directly
adding a functionality in the later, which needs to be reverted in the
former. Since that's what we are about to do in order to fix the commit
573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to
platform structure"), let's replace the stmmac_remove_config_dt() method
invocation in stmmac_probe_config_dt() with direct reversal procedures.

Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
.../ethernet/stmicro/stmmac/stmmac_platform.c | 23 ++++++++++---------
1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 1815fe36b62f..c9feac70ca77 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -402,7 +402,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
struct device_node *np = pdev->dev.of_node;
struct plat_stmmacenet_data *plat;
struct stmmac_dma_cfg *dma_cfg;
- void *ret;
int rc;

plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
@@ -458,7 +457,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
/* To Configure PHY by using all device-tree supported properties */
rc = stmmac_dt_phy(plat, np, &pdev->dev);
if (rc)
- return ERR_PTR(rc);
+ goto error_dt_phy_parse;

of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);

@@ -536,8 +535,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
GFP_KERNEL);
if (!dma_cfg) {
- stmmac_remove_config_dt(pdev, plat);
- return ERR_PTR(-ENOMEM);
+ rc = -ENOMEM;
+ goto error_dma_cfg_alloc;
}
plat->dma_cfg = dma_cfg;

@@ -564,10 +563,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
plat->axi = stmmac_axi_setup(pdev);

rc = stmmac_mtl_setup(pdev, plat);
- if (rc) {
- stmmac_remove_config_dt(pdev, plat);
- return ERR_PTR(rc);
- }
+ if (rc)
+ goto error_dma_cfg_alloc;

/* clock setup */
if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
@@ -582,7 +579,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)

plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
if (IS_ERR(plat->pclk)) {
- ret = plat->pclk;
+ rc = PTR_ERR(plat->pclk);
goto error_pclk_get;
}
clk_prepare_enable(plat->pclk);
@@ -601,7 +598,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
STMMAC_RESOURCE_NAME);
if (IS_ERR(plat->stmmac_rst)) {
- ret = plat->stmmac_rst;
+ rc = PTR_ERR(plat->stmmac_rst);
goto error_hw_init;
}

@@ -611,8 +608,12 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
clk_disable_unprepare(plat->pclk);
error_pclk_get:
clk_disable_unprepare(plat->stmmac_clk);
+error_dma_cfg_alloc:
+ of_node_put(plat->mdio_node);
+error_dt_phy_parse:
+ of_node_put(plat->phy_node);

- return ret;
+ return ERR_PTR(rc);
}

/**
--
2.29.2
\
 
 \ /
  Last update: 2021-02-08 15:11    [W:0.410 / U:1.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site