lkml.org 
[lkml]   [2021]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 22/24] net: stmmac: Call stmmaceth clock as system clock in warn-message
Date
By all means of the stmmac_clk clock usage it isn't CSR clock, but the
system or application clock, which in particular cases can be used as a
clock source for the CSR interface. Make sure the warning message
correctly identify the clock. While at it add error message printout if
actual CSR clock failed to be requested.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index a6e35c84e135..7cbde9d99133 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -573,7 +573,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
STMMAC_RESOURCE_NAME);
if (IS_ERR(plat->stmmac_clk)) {
rc = PTR_ERR(plat->stmmac_clk);
- dev_err_probe(&pdev->dev, rc, "Cannot get CSR clock\n");
+ dev_err_probe(&pdev->dev, rc, "Cannot get system clock\n");
goto error_dma_cfg_alloc;
}
clk_prepare_enable(plat->stmmac_clk);
@@ -581,6 +581,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
if (IS_ERR(plat->pclk)) {
rc = PTR_ERR(plat->pclk);
+ dev_err_probe(&pdev->dev, rc, "Cannot get CSR clock\n");
goto error_pclk_get;
}
clk_prepare_enable(plat->pclk);
--
2.29.2
\
 
 \ /
  Last update: 2021-02-08 15:17    [W:0.234 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site