lkml.org 
[lkml]   [2020]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] dt-bindings: mfd: Correct interrupt flags in examples
On Wed, Sep 09, 2020 at 06:30:44AM +0000, Vaittinen, Matti wrote:
>
> On Tue, 2020-09-08 at 16:59 +0200, Krzysztof Kozlowski wrote:
> > GPIO_ACTIVE_x flags are not correct in the context of interrupt
> > flags.
> > These are simple defines so they could be used in DTS but they will
> > not
> > have the same meaning:
> > 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> > 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
> >
> > Correct the interrupt flags, assuming the author of the code wanted
> > some
> > logical behavior behind the name "ACTIVE_xxx", this is:
> > ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> For BD70528:
> Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
>
> > ---
> > Documentation/devicetree/bindings/mfd/act8945a.txt | 2 +-
> > Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++-
> > Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt | 2 +-
> > 3 files changed, 4 insertions(+), 3 deletions(-)
> >
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-
> > pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-
> > pmic.txt
> > index c3c02ce73cde..386eec06cf08 100644
> > --- a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> > @@ -39,7 +39,7 @@ pmic: pmic@4b {
> > compatible = "rohm,bd70528";
> > reg = <0x4b>;
> > interrupt-parent = <&gpio1>;
> > - interrupts = <29 GPIO_ACTIVE_LOW>;
> > + interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
>
> This is how it should have been from the beginning :) Thanks!

I start to wonder now. It seems some boards do not configure a pull up
there, so IRQ_TYPE_LEVEL_LOW is wrong - causes the line to stay in low
state. But actually this maybe is a problem of missing pull up, not the
IRQ flag?

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2020-09-09 10:17    [W:0.201 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site