lkml.org 
[lkml]   [2020]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] dt-bindings: mfd: Correct interrupt flags in examples
On Wed, Sep 09, 2020 at 08:57:36AM +0000, Vaittinen, Matti wrote:
> Hello Krzysztof,
>
> On Wed, 2020-09-09 at 10:17 +0200, krzk@kernel.org wrote:
> > On Wed, Sep 09, 2020 at 06:30:44AM +0000, Vaittinen, Matti wrote:
> > > On Tue, 2020-09-08 at 16:59 +0200, Krzysztof Kozlowski wrote:
> > > > GPIO_ACTIVE_x flags are not correct in the context of interrupt
> > > > flags.
> > > > These are simple defines so they could be used in DTS but they
> > > > will
> > > > not
> > > > have the same meaning:
> > > > 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> > > > 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
> > > >
> > > > Correct the interrupt flags, assuming the author of the code
> > > > wanted
> > > > some
> > > > logical behavior behind the name "ACTIVE_xxx", this is:
> > > > ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
> > > >
> > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > >
> > > For BD70528:
> > > Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > >
> > > > ---
> > > > Documentation/devicetree/bindings/mfd/act8945a.txt | 2
> > > > +-
> > > > Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3
> > > > ++-
> > > > Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt | 2
> > > > +-
> > > > 3 files changed, 4 insertions(+), 3 deletions(-)
> > > >
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-
> > > > pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-
> > > > pmic.txt
> > > > index c3c02ce73cde..386eec06cf08 100644
> > > > --- a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> > > > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> > > > @@ -39,7 +39,7 @@ pmic: pmic@4b {
> > > > compatible = "rohm,bd70528";
> > > > reg = <0x4b>;
> > > > interrupt-parent = <&gpio1>;
> > > > - interrupts = <29 GPIO_ACTIVE_LOW>;
> > > > + interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
> > >
> > > This is how it should have been from the beginning :) Thanks!
> >
> > I start to wonder now. It seems some boards do not configure a pull
> > up
> > there, so IRQ_TYPE_LEVEL_LOW is wrong - causes the line to stay in
> > low
> > state. But actually this maybe is a problem of missing pull up, not
> > the
> > IRQ flag?
>
> The BD70528 is designed so that it will use level active interrupts -
> and line is pulled down when IRQ is active. Thus the example should
> have IRQ_TYPE_LEVEL_LOW - and your fix is correct.
>
> After that being said - I can't comment on actual board using BD70528
> (or other ROHM ICs) - even less I can comment boards using other ICs.
>
> After that being said - it's not a rare mistake to configure level
> active IRQs to be triggered at edge - it actually works most of the
> time - untill they deadlock at the race of generating new IRQ between
> reading the status and acking the line... I've debugged way too many
> such cases...
>
> Anyways, for BD70528 DTS example your fix looks correct. Thanks.

Thanks. I found this error in multiple DTS files - most probably a copy
paste from example or from evalkit (e.g. imx8mm-evk.dts). The trouble is
that I don't have the schematics for them and at least in one hardware
(Variscite VAR-SOM-MX8M which I am using) it looks like logic got
reversed...

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2020-09-09 11:21    [W:0.070 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site