lkml.org 
[lkml]   [2020]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] dt-bindings: mfd: Correct interrupt flags in examples
On Tue, Sep 8, 2020 at 7:59 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
> These are simple defines so they could be used in DTS but they will not
> have the same meaning:
> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
>
> Correct the interrupt flags, assuming the author of the code wanted some
> logical behavior behind the name "ACTIVE_xxx", this is:
> ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> Documentation/devicetree/bindings/mfd/act8945a.txt | 2 +-
> Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++-
> Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt | 2 +-
> 3 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
> index e6f168db6c72..5ca75d888b4a 100644
> --- a/Documentation/devicetree/bindings/mfd/act8945a.txt
> +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
> @@ -71,7 +71,7 @@ Example:
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
> interrupt-parent = <&pioA>;
> - interrupts = <45 GPIO_ACTIVE_LOW>;
> + interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
>
> active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
> active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
> diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> index 9b6eb50606e8..e541eb0d02ed 100644
> --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> @@ -147,6 +147,7 @@ required:
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> i2c {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -155,7 +156,7 @@ examples:
> compatible = "gw,gsc";
> reg = <0x20>;
> interrupt-parent = <&gpio1>;
> - interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <1>;
> #address-cells = <1>;

For gateworks-gsc.yaml:
Acked-By: Tim Harvey <tharvey@gateworks.com>

Thanks for finding this!

Tim

\
 
 \ /
  Last update: 2020-09-09 17:29    [W:0.108 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site