[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v6 0/4] iio: magnetometer: ak8975: Add gpio reset support
- reword documentation for gpios, add interrupt documentation

- add maintainer

- fix some typo
- use gpio's dt-bindings for more clarity in documentation
- set compatible properties without vendor prefix as deprecated

- fix patch messages style
- align reset gpio comment to kernel doc reccomendation
- introduce changelog

- rewording of reset gpio comment and patch messages to better clarify
reset gpio behaviour

- initial patch submission

Convert documentation from txt format to yaml. Add documentation about

Deassert reset on ak8975_power_on(), assert reset on ak8975_power_off().

Without reset's deassertion during ak8975_power_on(), driver's probe fails
on ak8975_who_i_am() while checking for device identity for AK09911 chip.

AK09911 has an active low reset gpio to handle register's reset.
AK09911 datasheet says that, if not used, reset pin should be connected
to VID. This patch emulates this situation.

Jonathan Albrieux (5):
dt-bindings: iio: magnetometer: ak8975: reword gpios, add interrupts,
fix style
dt-bindings: iio: magnetometer: ak8975: convert format to yaml, add
dt-bindings: iio: magnetometer: ak8975: add gpio reset support
iio: magnetometer: ak8975: Fix typo, uniform measurement unit style
iio: magnetometer: ak8975: Add gpio reset support

.../bindings/iio/magnetometer/ak8975.txt | 30 -------
.../iio/magnetometer/asahi-kasei,ak8975.yaml | 85 +++++++++++++++++++
drivers/iio/magnetometer/ak8975.c | 22 ++++-
3 files changed, 105 insertions(+), 32 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml


 \ /
  Last update: 2020-05-25 17:14    [W:0.111 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site