lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 2/5] dt-bindings: iio: magnetometer: ak8975: convert format to yaml, add maintainer
Date
Converts documentation from txt format to yaml.

Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
---
.../bindings/iio/magnetometer/ak8975.txt | 37 ---------
.../iio/magnetometer/asahi-kasei,ak8975.yaml | 78 +++++++++++++++++++
2 files changed, 78 insertions(+), 37 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
deleted file mode 100644
index 0576b9df0bf2..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* AsahiKASEI AK8975 magnetometer sensor
-
-Required properties:
-
- - compatible : should be "asahi-kasei,ak8975".
- - reg : the I2C address of the magnetometer.
-
-Optional properties:
-
- - gpios : AK8975 has a "Data ready" pin (DRDY) which informs that data
- is ready to be read and is possible to listen on it. If used,
- this should be active high. Prefer interrupt over this.
-
- - interrupts : interrupt for DRDY pin. Triggered on rising edge.
-
- - vdd-supply: an optional regulator that needs to be on to provide VDD.
-
- - mount-matrix: an optional 3x3 mounting rotation matrix.
-
-Example:
-
-ak8975@c {
- compatible = "asahi-kasei,ak8975";
- reg = <0x0c>;
- interrupt-parent = <&gpio6>;
- interrupts = <15 IRQ_TYPE_EDGE_RISING>;
- vdd-supply = <&ldo_3v3_gnss>;
- mount-matrix = "-0.984807753012208", /* x0 */
- "0", /* y0 */
- "-0.173648177666930", /* z0 */
- "0", /* x1 */
- "-1", /* y1 */
- "0", /* z1 */
- "-0.173648177666930", /* x2 */
- "0", /* y2 */
- "0.984807753012208"; /* z2 */
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
new file mode 100644
index 000000000000..a603659d5fa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/asahi-kasei,ak8975.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AsahiKASEI AK8975 magnetometer sensor
+
+maintainers:
+ - Jonathan Albrieux <jonathan.albrieux@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: asahi-kasei,ak8975
+ - const: asahi-kasei,ak8963
+ - const: asahi-kasei,ak09911
+ - const: asahi-kasei,ak09912
+ - const: ak8975
+ deprecated: true
+ - const: ak8963
+ deprecated: true
+ - const: ak09911
+ deprecated: true
+ - const: ak09912
+ deprecated: true
+
+ reg:
+ maxItems: 1
+ description: the I2C address of the magnetometer.
+
+ gpios:
+ description: |
+ AK8975 has a "Data ready" pin (DRDY) which informs that data
+ is ready to be read and is possible to listen on it. If used,
+ this should be active high. Prefer interrupt over this.
+
+ interrupts:
+ maxItems: 1
+ description: interrupt for DRDY pin. Triggered on rising edge.
+
+ vdd-supply:
+ maxItems: 1
+ description: |
+ an optional regulator that needs to be on to provide VDD power to
+ the sensor.
+
+ mount-matrix:
+ description: an optional 3x3 mounting rotation matrix.
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&ldo_3v3_gnss>;
+ mount-matrix = "-0.984807753012208", /* x0 */
+ "0", /* y0 */
+ "-0.173648177666930", /* z0 */
+ "0", /* x1 */
+ "-1", /* y1 */
+ "0", /* z1 */
+ "-0.173648177666930", /* x2 */
+ "0", /* y2 */
+ "0.984807753012208"; /* z2 */
+ };
+ };
--
2.17.1
\
 
 \ /
  Last update: 2020-05-25 17:14    [W:0.051 / U:2.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site