lkml.org 
[lkml]   [2020]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7] AM64: Add SERDES bindings and driver support
Date
AM64 uses the same SERDES as in J7200, however AM642 EVM doesn't
have a clock generator (unlike J7200 base board). Here the clock from
the SERDES has to be routed to the PCIE connector. This series adds
support to drive reference clock output from SERDES and also adds
SERDES (torrent) and SERDES wrapper (WIZ) bindings.

Kishon Vijay Abraham I (7):
dt-bindings: phy: ti,phy-j721e-wiz: Add bindings for AM64 SERDES
Wrapper
dt-bindings: phy: ti,phy-j721e-wiz: Add binding for phy_en_refclk
dt-bindings: phy: cadence-torrent: Add binding for refclk driver
dt-bindings: ti-serdes-mux: Add defines for AM64 SoC
phy: ti: j721e-wiz: Configure full rate divider for AM64
phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m>
phy: cadence-torrent: Add support to drive refclk out

.../bindings/phy/phy-cadence-torrent.yaml | 17 ++
.../bindings/phy/ti,phy-j721e-wiz.yaml | 23 ++-
drivers/phy/cadence/phy-cadence-torrent.c | 158 ++++++++++++++++++
drivers/phy/ti/phy-j721e-wiz.c | 158 +++++++++++++++++-
include/dt-bindings/mux/ti-serdes.h | 4 +
5 files changed, 354 insertions(+), 6 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2020-12-24 12:46    [W:0.346 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site