lkml.org 
[lkml]   [2020]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dmaengine: qcom: bam_dma: Add LOCK and UNLOCK flag bit support
Date
This change will add support for LOCK & UNLOCK flag bit support
on CMD descriptor.

If DMA_PREP_LOCK flag passed in prep_slave_sg then requester of this
transaction wanted to lock the DMA controller for this transaction so
BAM driver should set LOCK bit for the HW descriptor.

If DMA_PREP_UNLOCK flag passed in prep_slave_sg then requester of this
transaction wanted to unlock the DMA controller.so BAM driver should set
UNLOCK bit for the HW descriptor.

Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
---
Documentation/driver-api/dmaengine/provider.rst | 9 +++++++++
drivers/dma/qcom/bam_dma.c | 9 +++++++++
include/linux/dmaengine.h | 5 +++++
3 files changed, 23 insertions(+)

diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
index ddb0a81..d7516e2 100644
--- a/Documentation/driver-api/dmaengine/provider.rst
+++ b/Documentation/driver-api/dmaengine/provider.rst
@@ -599,6 +599,15 @@ DMA_CTRL_REUSE
- This flag is only supported if the channel reports the DMA_LOAD_EOT
capability.

+- DMA_PREP_LOCK
+
+ - If set , the client driver tells DMA controller I am locking you for
+ this transcation.
+
+- DMA_PREP_UNLOCK
+
+ - If set, the client driver will tells DMA controller I am releasing the lock
+
General Design Notes
====================

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index 4eeb8bb..cdbe395 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -58,6 +58,8 @@ struct bam_desc_hw {
#define DESC_FLAG_EOB BIT(13)
#define DESC_FLAG_NWD BIT(12)
#define DESC_FLAG_CMD BIT(11)
+#define DESC_FLAG_LOCK BIT(10)
+#define DESC_FLAG_UNLOCK BIT(9)

struct bam_async_desc {
struct virt_dma_desc vd;
@@ -644,6 +646,13 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,

/* fill in temporary descriptors */
desc = async_desc->desc;
+ if (flags & DMA_PREP_CMD) {
+ if (flags & DMA_PREP_LOCK)
+ desc->flags |= cpu_to_le16(DESC_FLAG_LOCK);
+ if (flags & DMA_PREP_UNLOCK)
+ desc->flags |= cpu_to_le16(DESC_FLAG_UNLOCK);
+ }
+
for_each_sg(sgl, sg, sg_len, i) {
unsigned int remainder = sg_dma_len(sg);
unsigned int curr_offset = 0;
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index dd357a7..79ccadb4 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -190,6 +190,9 @@ struct dma_interleaved_template {
* transaction is marked with DMA_PREP_REPEAT will cause the new transaction
* to never be processed and stay in the issued queue forever. The flag is
* ignored if the previous transaction is not a repeated transaction.
+ * @DMA_PREP_LOCK: tell the driver that DMA HW engine going to be locked for this
+ * transaction , until not seen DMA_PREP_UNLOCK flag set.
+ * @DMA_PREP_UNLOCK: tell the driver to unlock the DMA HW engine.
*/
enum dma_ctrl_flags {
DMA_PREP_INTERRUPT = (1 << 0),
@@ -202,6 +205,8 @@ enum dma_ctrl_flags {
DMA_PREP_CMD = (1 << 7),
DMA_PREP_REPEAT = (1 << 8),
DMA_PREP_LOAD_EOT = (1 << 9),
+ DMA_PREP_LOCK = (1 << 10),
+ DMA_PREP_UNLOCK = (1 << 11),
};

/**
--
2.7.4
\
 
 \ /
  Last update: 2020-12-17 15:40    [W:0.123 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site