lkml.org 
[lkml]   [2021]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dmaengine: qcom: bam_dma: Add LOCK and UNLOCK flag bit support
On 12-01-21, 15:01, mdalam@codeaurora.org wrote:
> On 2020-12-21 23:03, mdalam@codeaurora.org wrote:
> > On 2020-12-21 14:53, Vinod Koul wrote:
> > > Hello,
> > >
> > > On 17-12-20, 20:07, Md Sadre Alam wrote:
> > > > This change will add support for LOCK & UNLOCK flag bit support
> > > > on CMD descriptor.
> > > >
> > > > If DMA_PREP_LOCK flag passed in prep_slave_sg then requester of this
> > > > transaction wanted to lock the DMA controller for this transaction so
> > > > BAM driver should set LOCK bit for the HW descriptor.
> > > >
> > > > If DMA_PREP_UNLOCK flag passed in prep_slave_sg then requester
> > > > of this
> > > > transaction wanted to unlock the DMA controller.so BAM driver
> > > > should set
> > > > UNLOCK bit for the HW descriptor.
> > >
> > > Can you explain why would we need to first lock and then unlock..? How
> > > would this be used in real world.
> > >
> > > I have read a bit of documentation but is unclear to me. Also should
> > > this be exposed as an API to users, sounds like internal to driver..?
> > >
> >
> > IPQ5018 SoC having only one Crypto Hardware Engine. This Crypto Hardware
> > Engine
> > will be shared between A53 core & ubi32 core. There is two separate
> > driver dedicated
> > to A53 core and ubi32 core. So to use Crypto Hardware Engine
> > parallelly for encryption/description
> > we need bam locking mechanism. if one driver will submit the request
> > for encryption/description
> > to Crypto then first it has to set LOCK flag bit on command descriptor
> > so that other pipes will
> > get locked.
> >
> > The Pipe Locking/Unlocking will be only on command-descriptor. Upon
> > encountering a command descriptor

Can you explain what is a cmd descriptor?

> > with LOCK bit set, The BAM will lock all other pipes not related to
> > the current pipe group, and keep
> > handling the current pipe only until it sees the UNLOCK set then it
> > will release all locked pipes.
> > locked pipe will not fetch new descriptors even if it got event/events
> > adding more descriptors for
> > this pipe (locked pipe).
> >
> > No need to expose as an API to user because its internal to driver, so
> > while preparing command descriptor
> > just we have to update the LOCK/UNLOCK flag.

So IIUC, no api right? it would be internal to driver..?

--
~Vinod

\
 
 \ /
  Last update: 2021-01-12 11:12    [W:0.053 / U:2.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site