lkml.org 
[lkml]   [2019]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/15] net: phy: adin: add {write,read}_mmd hooks
Date
Both ADIN1200 & ADIN1300 support Clause 45 access.
The Extended Management Interface (EMI) registers are accessible via both
Clause 45 (at register MDIO_MMD_VEND1) and using Clause 22.

However, the Clause 22 MMD access operations differ from the implementation
in the kernel, in the sense that it uses registers ExtRegPtr (0x10) &
ExtRegData (0x11) to access Clause 45 & EMI registers.

The indirect access is done via the following mechanism (for both R/W):
1. Write the address of the register in the ExtRegPtr
2. Read/write the value of the register (written at ExtRegPtr)

This mechanism is needed to manage configuration of chip settings and to
access EEE registers (via Clause 22).

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/net/phy/adin.c | 46 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)

diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index 69000fb16704..a833e329be6f 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -14,6 +14,9 @@
#define PHY_ID_ADIN1200 0x0283bc20
#define PHY_ID_ADIN1300 0x0283bc30

+#define ADIN1300_MII_EXT_REG_PTR 0x0010
+#define ADIN1300_MII_EXT_REG_DATA 0x0011
+
#define ADIN1300_INT_MASK_REG 0x0018
#define ADIN1300_INT_MDIO_SYNC_EN BIT(9)
#define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8)
@@ -53,6 +56,45 @@ static int adin_phy_config_intr(struct phy_device *phydev)
ADIN1300_INT_MASK_EN);
}

+static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+ int phy_addr = phydev->mdio.addr;
+ int err;
+
+ if (phydev->is_c45) {
+ u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
+
+ return __mdiobus_read(bus, phy_addr, addr);
+ }
+
+ err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, regnum);
+ if (err)
+ return err;
+
+ return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA);
+}
+
+static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum,
+ u16 val)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+ int phy_addr = phydev->mdio.addr;
+ int err;
+
+ if (phydev->is_c45) {
+ u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
+
+ return __mdiobus_write(bus, phy_addr, addr, val);
+ }
+
+ err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, regnum);
+ if (err)
+ return err;
+
+ return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val);
+}
+
static struct phy_driver adin_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
@@ -65,6 +107,8 @@ static struct phy_driver adin_driver[] = {
.config_intr = adin_phy_config_intr,
.resume = genphy_resume,
.suspend = genphy_suspend,
+ .read_mmd = adin_read_mmd,
+ .write_mmd = adin_write_mmd,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
@@ -77,6 +121,8 @@ static struct phy_driver adin_driver[] = {
.config_intr = adin_phy_config_intr,
.resume = genphy_resume,
.suspend = genphy_suspend,
+ .read_mmd = adin_read_mmd,
+ .write_mmd = adin_write_mmd,
},
};

--
2.20.1
\
 
 \ /
  Last update: 2019-08-08 14:56    [W:0.281 / U:1.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site