lkml.org 
[lkml]   [2019]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 00/15] net: phy: adin: add support for Analog Devices PHYs
Date
On Thu, 2019-08-08 at 11:24 -0700, David Miller wrote:
> [External]
>
> From: Alexandru Ardelean <alexandru.ardelean@analog.com>
> Date: Thu, 8 Aug 2019 15:30:11 +0300
>
> > This changeset adds support for Analog Devices Industrial Ethernet PHYs.
> > Particularly the PHYs this driver adds support for:
> > * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY
> > * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit
> > Ethernet PHY
> >
> > The 2 chips are pin & register compatible with one another. The main
> > difference being that ADIN1200 doesn't operate in gigabit mode.
> >
> > The chips can be operated by the Generic PHY driver as well via the
> > standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the
> > kernel as well. This assumes that configuration of the PHY has been done
> > completely in HW, according to spec, i.e. no extra SW configuration
> > required.
> >
> > This changeset also implements the ability to configure the chips via SW
> > registers.
> >
> > Datasheets:
> > https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf
> > https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
>
> I think, at a minimum, the c22 vs. c45 issues need to be discussed more
> and even if no code changes occur there is definitely some adjustments
> and clairifications that need to occur on this issue in the commit
> messages and/or documentation.

I guess I'll drop/defer some of the C45 stuff for now.
I don't know how decisions were done when the chips were created.
I am told that C45 works, but I may need to find out more on my end, since I am also new to/unclear on some items.

[My personal feeling about this]
I think there are some confusions [internally on our side] about what C45 is and how it should be done.
I guess it's part of developing knowledge/skills for developing PHYs as a company.
There's plenty of knowledge for how to do the electrical, low-power-stuff, etc, and even the datasheet sometimes feels
like it's for an ADC/DAC.
[My personal feeling about this]

Thanks
Alex
\
 
 \ /
  Last update: 2019-08-09 14:56    [W:0.219 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site