lkml.org 
[lkml]   [2019]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 13/15] net: phy: adin: configure downshift on config_init
From
Date
On 08.08.2019 14:30, Alexandru Ardelean wrote:
> Down-speed auto-negotiation may not always be enabled, in which case the
> PHY won't down-shift to 100 or 10 during auto-negotiation.
>
> This change enables downshift and configures the number of retries to
> default 8 (maximum supported value).
>
> The change has been adapted from the Marvell PHY driver.
>
Instead of a fixed downshift setting (like in the Marvell driver) you
may consider to implement the ethtool phy-tunable ETHTOOL_PHY_DOWNSHIFT.
See the Aquantia PHY driver for an example.
Then the user can configure whether he wants downshift and if yes after
how many retries.

> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> ---
> drivers/net/phy/adin.c | 39 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
[...]

Heiner

\
 
 \ /
  Last update: 2019-08-08 21:40    [W:0.202 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site