lkml.org 
[lkml]   [2019]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 18/63] Documentation: ACPI: move aml-debugger.txt to firmware-guide/acpi and convert to reST
Date
This converts the plain text documentation to reStructuredText format and
add it to Sphinx TOC tree. No essential content change.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
---
Documentation/acpi/aml-debugger.txt | 66 ----------------
.../firmware-guide/acpi/aml-debugger.rst | 75 +++++++++++++++++++
Documentation/firmware-guide/acpi/index.rst | 1 +
3 files changed, 76 insertions(+), 66 deletions(-)
delete mode 100644 Documentation/acpi/aml-debugger.txt
create mode 100644 Documentation/firmware-guide/acpi/aml-debugger.rst

diff --git a/Documentation/acpi/aml-debugger.txt b/Documentation/acpi/aml-debugger.txt
deleted file mode 100644
index 75ebeb64ab29..000000000000
--- a/Documentation/acpi/aml-debugger.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-The AML Debugger
-
-Copyright (C) 2016, Intel Corporation
-Author: Lv Zheng <lv.zheng@intel.com>
-
-
-This document describes the usage of the AML debugger embedded in the Linux
-kernel.
-
-1. Build the debugger
-
- The following kernel configuration items are required to enable the AML
- debugger interface from the Linux kernel:
-
- CONFIG_ACPI_DEBUGGER=y
- CONFIG_ACPI_DEBUGGER_USER=m
-
- The userspace utilities can be built from the kernel source tree using
- the following commands:
-
- $ cd tools
- $ make acpi
-
- The resultant userspace tool binary is then located at:
-
- tools/power/acpi/acpidbg
-
- It can be installed to system directories by running "make install" (as a
- sufficiently privileged user).
-
-2. Start the userspace debugger interface
-
- After booting the kernel with the debugger built-in, the debugger can be
- started by using the following commands:
-
- # mount -t debugfs none /sys/kernel/debug
- # modprobe acpi_dbg
- # tools/power/acpi/acpidbg
-
- That spawns the interactive AML debugger environment where you can execute
- debugger commands.
-
- The commands are documented in the "ACPICA Overview and Programmer Reference"
- that can be downloaded from
-
- https://acpica.org/documentation
-
- The detailed debugger commands reference is located in Chapter 12 "ACPICA
- Debugger Reference". The "help" command can be used for a quick reference.
-
-3. Stop the userspace debugger interface
-
- The interactive debugger interface can be closed by pressing Ctrl+C or using
- the "quit" or "exit" commands. When finished, unload the module with:
-
- # rmmod acpi_dbg
-
- The module unloading may fail if there is an acpidbg instance running.
-
-4. Run the debugger in a script
-
- It may be useful to run the AML debugger in a test script. "acpidbg" supports
- this in a special "batch" mode. For example, the following command outputs
- the entire ACPI namespace:
-
- # acpidbg -b "namespace"
diff --git a/Documentation/firmware-guide/acpi/aml-debugger.rst b/Documentation/firmware-guide/acpi/aml-debugger.rst
new file mode 100644
index 000000000000..a889d43bc6c5
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/aml-debugger.rst
@@ -0,0 +1,75 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+================
+The AML Debugger
+================
+
+:Copyright: |copy| 2016, Intel Corporation
+:Author: Lv Zheng <lv.zheng@intel.com>
+
+
+This document describes the usage of the AML debugger embedded in the Linux
+kernel.
+
+1. Build the debugger
+=====================
+
+The following kernel configuration items are required to enable the AML
+debugger interface from the Linux kernel::
+
+ CONFIG_ACPI_DEBUGGER=y
+ CONFIG_ACPI_DEBUGGER_USER=m
+
+The userspace utilities can be built from the kernel source tree using
+the following commands::
+
+ $ cd tools
+ $ make acpi
+
+The resultant userspace tool binary is then located at::
+
+ tools/power/acpi/acpidbg
+
+It can be installed to system directories by running "make install" (as a
+sufficiently privileged user).
+
+2. Start the userspace debugger interface
+=========================================
+
+After booting the kernel with the debugger built-in, the debugger can be
+started by using the following commands::
+
+ # mount -t debugfs none /sys/kernel/debug
+ # modprobe acpi_dbg
+ # tools/power/acpi/acpidbg
+
+That spawns the interactive AML debugger environment where you can execute
+debugger commands.
+
+The commands are documented in the "ACPICA Overview and Programmer Reference"
+that can be downloaded from
+
+https://acpica.org/documentation
+
+The detailed debugger commands reference is located in Chapter 12 "ACPICA
+Debugger Reference". The "help" command can be used for a quick reference.
+
+3. Stop the userspace debugger interface
+========================================
+
+The interactive debugger interface can be closed by pressing Ctrl+C or using
+the "quit" or "exit" commands. When finished, unload the module with::
+
+ # rmmod acpi_dbg
+
+The module unloading may fail if there is an acpidbg instance running.
+
+4. Run the debugger in a script
+===============================
+
+It may be useful to run the AML debugger in a test script. "acpidbg" supports
+this in a special "batch" mode. For example, the following command outputs
+the entire ACPI namespace::
+
+ # acpidbg -b "namespace"
diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst
index 287a7cbd82ac..e9f253d54897 100644
--- a/Documentation/firmware-guide/acpi/index.rst
+++ b/Documentation/firmware-guide/acpi/index.rst
@@ -16,6 +16,7 @@ ACPI Support
method-tracing
DSD-properties-rules
debug
+ aml-debugger
gpio-properties
i2c-muxes
acpi-lid
--
2.20.1
\
 
 \ /
  Last update: 2019-04-23 18:33    [W:0.564 / U:1.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site