lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/9] thermal: tsens: Handle critical interrupts
Date
TSENS IP v2.x supports critical interrupts and v2.3+ adds watchdog support
in case the FSM is stuck. Enable support in the driver.

This series was generated on top of linux-next from 20191202 to capture
const changes for msm8976 that is queued currently.

Changes from v1:
- Make tsens_features non-const to allow run time detection of features
- Pass tsens_sensor around as a const
- Fix a bug to release dev pointer in success path
- Address review comments from Bjorn and Stephen (thanks for the review)
- Add msm8998 and msm8996 DTSI changes for critical interrupts

Amit Kucheria (9):
drivers: thermal: tsens: De-constify struct tsens_features
drivers: thermal: tsens: Pass around struct tsens_sensor as a constant
drivers: thermal: tsens: use simpler variables
drivers: thermal: tsens: Release device in success path
drivers: thermal: tsens: Add critical interrupt support
drivers: thermal: tsens: Add watchdog support
arm64: dts: sdm845: thermal: Add critical interrupt support
arm64: dts: msm8996: thermal: Add critical interrupt support
arm64: dts: msm8998: thermal: Add critical interrupt support

arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 +-
arch/arm64/boot/dts/qcom/msm8998.dtsi | 10 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 +-
drivers/thermal/qcom/tsens-8960.c | 4 +-
drivers/thermal/qcom/tsens-common.c | 188 +++++++++++++++++++++++---
drivers/thermal/qcom/tsens-v0_1.c | 6 +-
drivers/thermal/qcom/tsens-v1.c | 6 +-
drivers/thermal/qcom/tsens-v2.c | 24 +++-
drivers/thermal/qcom/tsens.c | 26 +++-
drivers/thermal/qcom/tsens.h | 104 ++++++++++++--
10 files changed, 332 insertions(+), 56 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2019-12-03 06:24    [W:1.020 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site