lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 8/9] arm64: dts: msm8996: thermal: Add critical interrupt support
Date
Register critical interrupts for each of the two tsens controllers

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 4ca2e7b44559c..fec0e50fe4fa3 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -591,8 +591,9 @@
reg = <0x4a9000 0x1000>, /* TM */
<0x4a8000 0x1000>; /* SROT */
#qcom,sensors = <13>;
- interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};

@@ -601,8 +602,9 @@
reg = <0x4ad000 0x1000>, /* TM */
<0x4ac000 0x1000>; /* SROT */
#qcom,sensors = <8>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};

--
2.17.1
\
 
 \ /
  Last update: 2019-12-03 06:24    [W:0.034 / U:6.240 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site