| From | Peter Senna Tschudin <> | Subject | [PATCH 5/5] arm/dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge | Date | Mon, 30 May 2016 18:39:45 +0200 |
| |
Configure the GE B850v3 to use the LVDS/DP++ bridge.
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> --- arch/arm/boot/dts/imx6q-b850v3.dts | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 88a70de..d366384 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -77,6 +77,13 @@ fsl,data-mapping = "spwg"; fsl,data-width = <24>; status = "okay"; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&b850v3_lvds_dp_bridge_in>; + }; + }; }; }; @@ -147,3 +154,27 @@ reg = <0x4a>; }; }; + +&mux2_i2c2 { + status = "okay"; + clock-frequency = <100000>; + + b850v3_lvds_dp_bridge { + compatible = "ge,b850v3_lvds_dp"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + edid-reg = <0x72>; + + port@0 { + reg = <0>; + b850v3_lvds_dp_bridge_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; -- 2.5.5
|