lkml.org 
[lkml]   [2016]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH V5 2/4] Documentation/devicetree/bindings: b850v3_lvds_dp
    Date
    Devicetree bindings documentation for the GE B850v3 LVDS/DP++
    display bridge.

    Cc: Martyn Welch <martyn.welch@collabora.co.uk>
    Cc: Martin Donnelly <martin.donnelly@ge.com>
    Cc: Javier Martinez Canillas <javier@dowhile0.org>
    Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
    Cc: Philipp Zabel <p.zabel@pengutronix.de>
    Cc: Rob Herring <robh@kernel.org>
    Cc: Fabio Estevam <fabio.estevam@nxp.com>
    Acked-by: Rob Herring <robh@kernel.org>
    Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
    ---
    Unchanged from V4

    Changes from V3:
    - 2/4 instead of 3/5

    Unchanged from V2

    Changes from V1:
    - Replaced '_' by '-' in node names or compatible strings
    - Added missing @73 to the example


    .../devicetree/bindings/ge/b850v3-lvds-dp.txt | 37 ++++++++++++++++++++++
    1 file changed, 37 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt

    diff --git a/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
    new file mode 100644
    index 0000000..f05c3e9
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
    @@ -0,0 +1,37 @@
    +Driver for GE B850v3 LVDS/DP++ display bridge
    +
    +Required properties:
    + - compatible : should be "ge,b850v3-lvds-dp".
    + - reg : should contain the address used to ack the interrupts.
    + - interrupt-parent : phandle of the interrupt controller that services
    + interrupts to the device
    + - interrupts : one interrupt should be described here, as in
    + <0 IRQ_TYPE_LEVEL_HIGH>.
    + - edid-reg : should contain the address used to read edid information
    + - port : should describe the video signal connection between the host
    + and the bridge.
    +
    +Example:
    +
    +&mux2_i2c2 {
    + status = "okay";
    + clock-frequency = <100000>;
    +
    + b850v3-lvds-dp-bridge@73 {
    + compatible = "ge,b850v3-lvds-dp";
    + #address-cells = <1>;
    + #size-cells = <0>;
    +
    + reg = <0x73>;
    + interrupt-parent = <&gpio2>;
    + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
    +
    + edid-reg = <0x72>;
    +
    + port {
    + b850v3_dp_bridge_in: endpoint {
    + remote-endpoint = <&lvds0_out>;
    + };
    + };
    + };
    +};
    --
    2.5.5
    \
     
     \ /
      Last update: 2016-08-09 19:21    [W:2.273 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site