Messages in this thread Patch in this message | | | From | Peter Senna Tschudin <> | Subject | [PATCH V5 4/4] dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge | Date | Tue, 9 Aug 2016 18:41:42 +0200 |
| |
Configures the GE B850v3 LVDS/DP++ bridge on the dts file.
Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> --- Unchanged from V4
Changes from V3: - 4/4 instead of 5/5
Unchanged from V2
Changes from V1: - Replaced '_' by '-' in node names or compatible strings - Added missing @73 to b850v3-lvds-dp-bridge
arch/arm/boot/dts/imx6q-b850v3.dts | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 167f744..8db3bf2 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -72,6 +72,13 @@ fsl,data-mapping = "spwg"; fsl,data-width = <24>; status = "okay"; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&b850v3_lvds_dp_bridge_in>; + }; + }; }; }; @@ -142,3 +149,26 @@ reg = <0x4a>; }; }; + +&mux2_i2c2 { + status = "okay"; + clock-frequency = <100000>; + + b850v3-lvds-dp-bridge@73 { + compatible = "ge,b850v3-lvds-dp"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + edid-reg = <0x72>; + + port { + b850v3_lvds_dp_bridge_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; -- 2.5.5
| |