lkml.org 
[lkml]   [2015]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable
Date
88PM800 family of device supports output of 32KHz clock (low jitter)
on CLK32K2/3 pin which can be supplied to other peripherals on the board.

This patch adds the devicetree binding to enable this feature.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
---
Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt
index dec842f..ae1311c 100644
--- a/Documentation/devicetree/bindings/mfd/88pm800.txt
+++ b/Documentation/devicetree/bindings/mfd/88pm800.txt
@@ -9,6 +9,12 @@ Required parent device properties:
- #interrupt-cells : should be 1.
The cell is the 88pm80x local IRQ number

+Optional properties :
+ - marvell,88pm800-32khz-xolj-out-en : If set, driver will enable low jitter
+ version of 32Khz clock output on
+ CLK32K3 - for 88pm800
+ CLK32K2 - for 88pm860
+
88pm80x family of devices consists of varied group of sub-devices:

Device Supply Names Description
--
1.9.1


\
 
 \ /
  Last update: 2015-07-09 14:01    [W:1.348 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site