lkml.org 
[lkml]   [2015]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 05/17] phy: omap-usb2: Add a new compatible string for USB2 PHY2
On Tue, 23 Jun 2015 17:28:50 +0530
Kishon Vijay Abraham I <kishon@ti.com> wrote:

> The USB2 PHY2 has a different register map compared to USB2 PHY1
> to power on/off the PHY. In order to handle it, add a new
> "compatible" string.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> Documentation/devicetree/bindings/phy/ti-phy.txt | 2 ++
> drivers/phy/phy-omap-usb2.c | 9 +++++++++
> 2 files changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
> index 52c7a92..b9101b9 100644
> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
> @@ -31,6 +31,8 @@ OMAP USB2 PHY
>
> Required properties:
> - compatible: Should be "ti,omap-usb2"
> + Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
> + in DRA7x
> - reg : Address and length of the register set for the device.
> - #phy-cells: determine the number of cells that should be given in the
> phandle while referencing this phy.
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
> index b5c266a..2f7220f 100644
> --- a/drivers/phy/phy-omap-usb2.c
> +++ b/drivers/phy/phy-omap-usb2.c
> @@ -159,6 +159,11 @@ static const struct usb_phy_data dra7x_usb2_data = {
> .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
> };
>
> +static const struct usb_phy_data dra7x_usb2_phy2_data = {
> + .label = "dra7x_usb2_phy2",
> + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,

Isn't it better to define the register map in usb_phy_data
so that you don't need to check for compatible flag everytime?

> +};
> +
> static const struct usb_phy_data am437x_usb2_data = {
> .label = "am437x_usb2",
> .flags = 0,
> @@ -178,6 +183,10 @@ static const struct of_device_id omap_usb2_id_table[] = {
> .data = &dra7x_usb2_data,
> },
> {
> + .compatible = "ti,dra7x-usb2-phy2",
> + .data = &dra7x_usb2_phy2_data,
> + },
> + {
> .compatible = "ti,am437x-usb2",
> .data = &am437x_usb2_data,
> },
> --
> 1.7.9.5
>

cheers,
-roger


\
 
 \ /
  Last update: 2015-06-24 13:21    [W:0.153 / U:1.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site