lkml.org 
[lkml]   [2015]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 17/17] ARM: dts: omap4: Use "syscon-otghs" instead of "ctrl-module" in USB node
* Kishon Vijay Abraham I <kishon@ti.com> [150623 05:02]:
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -852,12 +852,6 @@
> };
> };
>
> - omap_control_usbotg: control-phy@4a00233c {
> - compatible = "ti,control-phy-otghs";
> - reg = <0x4a00233c 0x4>;
> - reg-names = "otghs_control";
> - };
> -
> usb_otg_hs: usb_otg_hs@4a0ab000 {
> compatible = "ti,omap4-musb";
> reg = <0x4a0ab000 0x7ff>;
> @@ -870,7 +864,7 @@
> multipoint = <1>;
> num-eps = <16>;
> ram-bits = <12>;
> - ctrl-module = <&omap_control_usbotg>;
> + syscon-otghs = <&scm_conf 0x33c>;
> };
>
> aes: aes@4b501000 {

We should still keep a separate entry for the phy in the dtsi
files. And the phy should be a child of the scm_conf area in the
dtsi file.

This is because the scm and usb_otg_hs are separate devices and
can be clocked separately. So the phy driver needs to be a
separate driver to avoid spaghetti code and issues with clocking.

Regards,

Tony


\
 
 \ /
  Last update: 2015-06-24 13:01    [W:0.173 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site