Messages in this thread | | | Date | Thu, 21 Aug 2014 22:28:56 +0400 | From | Sergei Shtylyov <> | Subject | Re: [PATCH 1/2] doc: dt/bindings: input: introduce TI DRV2667 haptic driver description |
| |
Hello.
On 08/21/2014 10:19 PM, Dan Murphy wrote:
> DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators. > Adding dt binding for this part
> Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > .../devicetree/bindings/input/ti,drv2667.txt | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt
> diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt > new file mode 100644 > index 0000000..525216d > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt > @@ -0,0 +1,18 @@ > +Texas Instruments - drv2667 Haptics driver > + > +The drv2667 uses serial control bus communicates through I2C protocols
I can't parse that.
> + > +Required properties: > + - compatible - "ti,drv2667" - DRV2667 > + - reg - I2C slave address > + - vbat-supply - Required supply regulator > + > +Example: > + > +drv2667: drv2667@59 { > + compatible = "ti,drv2667"; > + reg = <0x59>;
You say "vbat-supply" is mandatory, yet you don't have it in your example?
WBR, Sergei
| |